Killer work from Scott Sweeney!

Post Reply
User avatar
texascurt
Posts: 13
Joined: Sat Sep 04, 2021 4:07 pm
Location: Houston TX

Killer work from Scott Sweeney!

Post by texascurt »

I've had Scott Sweeney at Sweeney Brass in Raleigh NC do several custom repairs and modifications for me over the last couple of years, and he's always exceeded my expectations.

I sent a NY Bach 16 to Scott a few months ago that I'd picked up cheap at an auction. It had a badly damaged bell flare that I didn't think was salvageable. I asked him to cut the flare off and replace it with a flare from another horn. Instead, he was able to do a PERFECT looking repair on the flare and added the cut bell conversion. This thing plays AMAZINGLY well. Better than any other 16 I've played.

I just wanted to give major kudos to Scott and highly recommend that others use him!
User avatar
texascurt
Posts: 13
Joined: Sat Sep 04, 2021 4:07 pm
Location: Houston TX

Re: Killer work from Scott Sweeney!

Post by texascurt »

IMG_0246.jpg
IMG_0248 (1).jpg
IMG_0250.jpg
IMG_0254.jpg
IMG_0257.jpg
IMG_0262.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
dukesboneman
Posts: 715
Joined: Mon Apr 02, 2018 4:40 pm
Location: Sarasota, Florida
Contact:

Re: Killer work from Scott Sweeney!

Post by dukesboneman »

That looks amazing ! How do you like the cut Bell?
What did it do to the sound and feel of the horn?
I played a Marshall Gilkes Shires a couple months back and was surprised how "Sound Forward " it was.
Different kind of feedback on my end
Posaunus
Posts: 3888
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Killer work from Scott Sweeney!

Post by Posaunus »

Does the Bach 16 play a little better after sipping some Maker's Mark?
officermayo
Posts: 501
Joined: Wed Jun 09, 2021 5:07 pm
Location: Gadsden, AL

Re: Killer work from Scott Sweeney!

Post by officermayo »

Is there a difference between cut and screw bells, or has the terminology just changed?
"When in doubt, blow out" - MSgt M.A. Mayo, Marine Band

The contest entry form said "Void where prohibited", so I peed on the Captain's desk.
User avatar
elmsandr
Posts: 1075
Joined: Fri Mar 23, 2018 2:43 pm
Location: S.E. Michigan
Contact:

Re: Killer work from Scott Sweeney!

Post by elmsandr »

officermayo wrote: Wed Jun 14, 2023 12:03 pm Is there a difference between cut and screw bells, or has the terminology just changed?
Different words for the same thing here.

Cheers,
Andy
User avatar
texascurt
Posts: 13
Joined: Sat Sep 04, 2021 4:07 pm
Location: Houston TX

Re: Killer work from Scott Sweeney!

Post by texascurt »

Posaunus wrote: Wed Jun 14, 2023 11:24 am Does the Bach 16 play a little better after sipping some Maker's Mark?
Everything plays better after a little bourbon :)

At least in my mind...
User avatar
texascurt
Posts: 13
Joined: Sat Sep 04, 2021 4:07 pm
Location: Houston TX

Re: Killer work from Scott Sweeney!

Post by texascurt »

dukesboneman wrote: Wed Jun 14, 2023 10:07 am That looks amazing ! How do you like the cut Bell?
What did it do to the sound and feel of the horn?
I played a Marshall Gilkes Shires a couple months back and was surprised how "Sound Forward " it was.
Different kind of feedback on my end

The sound to me is a lot more focused, and I don't know if that was due to the slight added weight of the screw ring or what.... but I really like it. And yes, the feedback is different but to me an improvement. After owning/buying/selling dozens of small bore horns I think this is my "forever horn". :)
Post Reply

Return to “Modification & Repair”