What tenor and bass mouthpieces are you using?

PhilTrombone
Posts: 127
Joined: Tue Nov 06, 2018 10:50 am

Re: What tenor and bass mouthpieces are you using?

Post by PhilTrombone »

Bach 36: Warburton 7M (T4)
Conn 88H: Warburton 7D (Symphony T)
Conn 62H: Conn 3

In the 5+ decades I have been playing, I have not experimented with mouthpieces anywhere near what I see from many folks on this board. Varying mouthpieces across different sized horns, I do like to keep the rim size constant. I played Giardinelli 3M and 3D (screw-rims) for a long time, then moved to Wick (4BS) on my main axe, a Bach 36. Loved it, but at a time when I was not playing enough, endurance became an issue. I like that Warburtons offer so many choices, and screw-on backbores.

I have played the same Conn 3 mouthpiece on bass forever - it came with the horn. I cannot take a _big_ mouthpiece. Even a 2G makes me uncomfortable. When I see you peeps talking about your 1G's and 0AL's I start to hyperventilate!

Thanks for this thread. Interesting to see!
HGrobot
Posts: 30
Joined: Mon May 27, 2019 10:57 am
Location: Tacoma, Washington

Re: What tenor and bass mouthpieces are you using?

Post by HGrobot »

Small bore: Bach 7C - Not comfortable to play on need to change
Large Bore: Hammond 12ML
davebb wrote: Sat Jun 27, 2020 12:17 am (Based on the results above) Does anybody in their right mind play a Bach 4G (or 5G).? I was expecting to see more.
(Apologies to any 4G or 5G players who have payed above )
I primarily played on any one of a few 5Gs I have owned up until I got my new horn earlier this year. I pulled the Hammond out of the drawer when I got it, and it just sounds and feels a lot better on that horn.
User avatar
KRRath
Posts: 11
Joined: Fri Mar 23, 2018 10:07 am
Location: South Dakota

Re: What tenor and bass mouthpieces are you using?

Post by KRRath »

King 2103F/3BF: Benge 6.5AL or Bach 5G depending what I'm playing
Edwards T-350: Griego 5 NY blank
Getzen 1052FDR: Getzen 1 1/2 - I tried several different sizes and brands and ended up with the mp that came with the horn.
Kevin R.
User avatar
King2bPlus
Posts: 41
Joined: Sun Apr 01, 2018 2:42 pm
Location: Howell, NJ

Re: What tenor and bass mouthpieces are you using?

Post by King2bPlus »

Elliott LT N 104, C/C2 or C+/D2
Ken Jackson
King 2b+, King 3b
Elliott LT 104N, C, C2
Elliott LT 104N, C+, D2
User avatar
bassclef
Posts: 199
Joined: Fri Mar 23, 2018 8:30 am
Location: Ohio, USA

Re: What tenor and bass mouthpieces are you using?

Post by bassclef »

Yamaha YSL-891z: Stork T1
Yamaha YSL-640: Stork T1
Yamaha YSL-882OR: Stork BT4.5
Yamaha YBL-613: Stork BT1.5
sporto
Posts: 64
Joined: Mon Jul 09, 2018 9:47 am
Location: San Diego, CA

Re: What tenor and bass mouthpieces are you using?

Post by sporto »

Yamaha 45C with gold plated rim, cup & backbore
User avatar
harrisonreed
Posts: 4491
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by harrisonreed »

Seriously, where did all the AR Resonances go? Last year people couldn't stop putting pictures of those things on this forum.
Rusty
Posts: 302
Joined: Fri Jun 01, 2018 6:30 am

Re: What tenor and bass mouthpieces are you using?

Post by Rusty »

harrisonreed wrote: Tue Jul 07, 2020 5:17 pm Seriously, where did all the AR Resonances go? Last year people couldn't stop putting pictures of those things on this forum.
I played one for a while, they’re very easy to play and are different to almost anything else I’ve tried, but I just prefer the sound I get with my MV 6.5a and Doug Elliot pieces.

A few guys in my town still play them and sound great. I’m talking small bore here, I’m not sure if his large tenor and bass pieces really took off.
User avatar
Burgerbob
Posts: 4530
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by Burgerbob »

Rusty wrote: Wed Jul 08, 2020 3:47 am


A few guys in my town still play them and sound great. I’m talking small bore here, I’m not sure if his large tenor and bass pieces really took off.
I got a chance to check out all the bass pieces at a festival last year. The smaller stuff may have been good, but he didn't have anything very large, deep, or open (i'm talking even a 1.25 size cup depth). That's probably a big old portion of the market left out.
Aidan Ritchie, LA area player and teacher
User avatar
Bengebasstrombone
Posts: 10
Joined: Wed Jul 01, 2020 2:36 pm

Re: What tenor and bass mouthpieces are you using?

Post by Bengebasstrombone »

This is what I've found works best with my face and preferred horns right now. I feel like there's still room for improvement but I'm not in a position to go on a wild goose chase looking for the "perfect" mouthpiece for every horn I have...

Bass: Bach 1G Megatone (Benge 290)
Large bore tenor: Benge 1.5G (King 5B)
Small bore tenor: "Carl Fischer" 11C ("The Indiana" trombone, close to Martin Committee)
User avatar
deanmccarty
Posts: 178
Joined: Tue May 01, 2018 10:20 am
Location: Texas
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by deanmccarty »

Bass - Schilke-Reichenbach (everything except orchestral), Ferguson-L (orchestral)
.547 Tenor - Elliott 100G/G8
.525 Tenor - Elliott MT100G/D4
Small Tenor and Alto - Elliott 95G/B2
Last edited by deanmccarty on Wed Sep 23, 2020 9:17 pm, edited 1 time in total.
Dean McCarty
“Have a good time... all the time.” - Viv Savage, Spinal Tap :cool:

Rath R9D-Ferguson-L
Jürgen Voigt 189-FX, Elliott 100G8
Rath R10-Elliott 95B
Jürgen Voigt J-711 Alto-Elliott 95B
Jürgen Voigt J-470 Contra-Ferguson 2A
Basbasun
Posts: 494
Joined: Mon Mar 26, 2018 3:03 am

Re: What tenor and bass mouthpieces are you using?

Post by Basbasun »

Bass 1 1/2G , 1 1/4G, depending on the job. I am testing "Mr Bass" , interestng.
547 tenor 5G. 525 tenor 6 1/2 , 500 tenor 11C or Giardinelly (#?)
User avatar
Geordie
Posts: 271
Joined: Fri Mar 30, 2018 10:45 am
Location: UK

Re: What tenor and bass mouthpieces are you using?

Post by Geordie »

Navigating my way to a Doug Elliot Mouthpiece. Got a XT 103 rim I love and now trying to decide if a D cup is too big and if I should go C or C+. Not yet got the two Cs.
-----------------------------------------------------------------------
Life is not a rehearsal
User avatar
noordinaryjoe
Posts: 95
Joined: Mon Jul 06, 2020 10:01 am
Location: Northeast PA

Re: What tenor and bass mouthpieces are you using?

Post by noordinaryjoe »

Tenor (.500") - modern King 12C (I believe same as the CKB's?) or Parduba *5* with the throat opened a bit.
Bass - Marcinkiewicz 8H/6.5AL or Schilke 57 (depending on the gig)
Last edited by noordinaryjoe on Mon Jul 20, 2020 11:30 am, edited 1 time in total.
Yamaha YBL-612R II
YSL-651
Schiller Heritage Bb/C (YSL-350C clone)
Pirate
conn88Hagmann
Posts: 373
Joined: Thu Aug 09, 2018 1:56 pm
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by conn88Hagmann »

I use and love

Large Tenor DE XT102 with H Cup
Bass Bone DE LB110 With K cup

Small tenor / Alto DE LT100 Or 99 with F, D, C or B cup depending what I’m doing.
Tbarh
Posts: 380
Joined: Thu Aug 16, 2018 12:59 pm

Re: What tenor and bass mouthpieces are you using?

Post by Tbarh »

Bass: Holton E185, Symington 2
Symph. Tenor : Holton 168 with E185 slide, Pickett 3S custom (Remington throat/backbore)
Tenor: 1921 Conn 78H, Pickett 3-5S custom (Bach 11C throat/backbore)
User avatar
tim
Posts: 110
Joined: Wed Apr 18, 2018 10:27 am

Re: What tenor and bass mouthpieces are you using?

Post by tim »

Bach 1 1/4 g with Remington shank for my 62h
Bach 6 1/2 g with Remington shank for my 88h
Tim

"We play a slide bugle"
User avatar
ssking2b
Posts: 352
Joined: Sat Sep 29, 2018 1:34 pm
Location: Richmond, VA metropolitan area
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by ssking2b »

Alto trombone: Marcinkiewicz ET7
Small Tenor trombone (.500): modified Bach 11C
Large bore Tenor trombone (.547): Marcinkiewicz ET1
Euphonium: XO5G
Bass Trombone: Marcinkiewicz 105
3/4 Tuba: Denis Wick Heritage 1L
4/4 Tuba: Selmansberger Symphony with MO Large HLB rim
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
bigbandbone
Posts: 583
Joined: Thu Jan 17, 2019 7:45 am

Re: What tenor and bass mouthpieces are you using?

Post by bigbandbone »

bigbandbone wrote: Mon May 25, 2020 8:47 am Bach 15CW and Denis Wick 0AL
Since posting this I realized the 0AL was a little too big for me. I've settled in on a 1AL. Time will tell.
User avatar
PhilG
Posts: 7
Joined: Mon Apr 09, 2018 5:33 am
Location: Derbyshire, United Kingdom

Re: What tenor and bass mouthpieces are you using?

Post by PhilG »

On my bass trombone (Holton TR181) I've just changed from a Rath B1.5W to a Rath CB2B. Liking it a lot so far :-)
Lastbone
Posts: 46
Joined: Wed May 15, 2019 4:56 pm
Location: Galena IL

Re: What tenor and bass mouthpieces are you using?

Post by Lastbone »

Tenor trombone - Schilke 52E2
Basses - Griego .25
modelerdc
Posts: 276
Joined: Thu May 03, 2018 9:34 pm

Re: What tenor and bass mouthpieces are you using?

Post by modelerdc »

Bass bone: Elliott 111W rim various cups, mostly a Laskey 85MD threaded to take Elliott bass rims
Large tenor, Euphonium: King 4G one came used with a horn I bought and found as a surprise I liked it a lot!
Bach 36 Elliott 101E4
Small Tenor, bass trumpet: Elliott 101D3
Alto (seldom need to play) Elliott 100C with alto shank
Tuba: Yamaha 66
Last edited by modelerdc on Mon Dec 07, 2020 1:00 am, edited 1 time in total.
Basbasun
Posts: 494
Joined: Mon Mar 26, 2018 3:03 am

Re: What tenor and bass mouthpieces are you using?

Post by Basbasun »

harrisonreed wrote: Tue Jul 07, 2020 5:17 pm Seriously, where did all the AR Resonances go? Last year people couldn't stop putting pictures of those things on this forum.
I did play one on my bass for some time. Very easy to play fast response. But does not make it easy to blend with a section where all the players played "normal" mpc. It have a tendency to sound nasty.
User avatar
deanmccarty
Posts: 178
Joined: Tue May 01, 2018 10:20 am
Location: Texas
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by deanmccarty »

My setups are a little small all the way around (even on tuba), but it works for me.
Bass - Schilke Reichenbach (gold) (in between a Schilke 58 & 59) for everything except orchestral, Ferguson L (gold) (about the same as a Schilke 59 rim with a 60 cup) for orchestral
Large tenor - Elliott 100G/G8 (equivalent to a Bach 6.5 rim with a 4G cup)
Medium tenor - Elliott MT100G/D4 (equivalent to a Bach 6.5)
Small tenor - Elliott 95G/B2 (equivalent to a Bach 17)
Dean McCarty
“Have a good time... all the time.” - Viv Savage, Spinal Tap :cool:

Rath R9D-Ferguson-L
Jürgen Voigt 189-FX, Elliott 100G8
Rath R10-Elliott 95B
Jürgen Voigt J-711 Alto-Elliott 95B
Jürgen Voigt J-470 Contra-Ferguson 2A
ajeasley
Posts: 23
Joined: Sat Jul 25, 2020 5:40 am
Location: Lawrence, KS

Re: What tenor and bass mouthpieces are you using?

Post by ajeasley »

Small Bore Tenor: Hammond 12 S
Large Bore Tenor: Hammond 12 ML
Euphonium: Hammond 12 XL
Bass: Bach 2G, but I haven't played bass in years.

Basically, I found a rim that I like and just adjust the cup/shank size for each use case. I used to use a Bach 4G and later a Wick Heritage 4 AL on everything (I'm more of a euphonium player by trade and education), which honestly worked well enough. A slightly smaller cup size on trombone helped me get away from the whole 'slide euphonium' sound concept.
mbtrombone
Posts: 122
Joined: Tue Jan 29, 2019 6:14 pm

Re: What tenor and bass mouthpieces are you using?

Post by mbtrombone »

Hi Everyone,

Just thought I would say thanks for responding so far. Interesting to see what people are using. I personally have recently bought some new mouthpieces for the first time in about 7 years and the following will be the set ups for the next month or so:

Shires Bass: Schilke 59 or Hammond 21BXL
Shires Tenor: Lindberg 4CL
Bach 42BOG: Wick 4.5AL
Conn 18H: Schilke 51D or Yamaha 48

Hope you are all well.
ChadA
Posts: 150
Joined: Tue Dec 04, 2018 5:27 pm
Location: Dayton, OH
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by ChadA »

For me, it's all Hammond stuff:

Alto: 10S
525/547 tenor: 10MXL
547 tenor: 10ML
Bass: 21BXL with enlarged throat and backbore

Yes, I've tried smaller rims on alto, and I sound worse. :) I have tried smaller pieces on all horns, actually, and I sound and feel best on these.
PaulT
Posts: 372
Joined: Wed Jul 18, 2018 9:55 pm
Location: North Dakota

Re: What tenor and bass mouthpieces are you using?

Post by PaulT »

.508: Yamaha Nils Landgren

.525: Yamaha 48

.547: don't play much anymore, but when I was, I was using a Yamaha 51C4. If I pulled it out tomorrow, I would probably just put the 48 in it.

(basically, now that there is no band, I am playing the .508 with the Nils Landgren pretty much exclusively. Sometimes I stick the 48 in there, and that works well, but the horn and I are both just a little more musical with the Nils Landgren)
User avatar
Russjones92
Posts: 23
Joined: Thu Jan 31, 2019 10:42 am
Location: High Point NC

Re: What tenor and bass mouthpieces are you using?

Post by Russjones92 »

Denis Wick 3AL Heritage in .548
Jbeckett
Posts: 860
Joined: Sun Mar 25, 2018 5:56 pm

Re: What tenor and bass mouthpieces are you using?

Post by Jbeckett »

.547 Yamaha YSL-8820g Greg black 1-1/2GM/Bach 1-1/2GM
.562 Yamaha YBL-620g laskey 93d/Greg Black 1GM
.562 Yamaha YBL-830 Greg Black 1gl .312 #2/0g

Weight difference, between bore size and resonance, has a huge effect on projection as well. Waiting on an 0gl .312 #2 now.
tbonesullivan
Posts: 1461
Joined: Tue Jul 02, 2019 9:06 am
Location: New Jersey
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by tbonesullivan »

Oh boy. This is a somewhat loaded question.

For Alto Trombone and Jazz Tenor, I use a Bach 7C, 6 3/4C, and a Ferguson 11C, which are all about the same size.

For regular tenor, I use mouthpieces that are roughly an old Bach 4G size, with a smaller cup. These include a Laskey 59MD, a Hammond 11ML, a Hammond 11L, and a Ferguson B-series 4G-5G

For Bass Trombone, my current main squeeze is a Ferguson L, based on a Minick L. I also use a Laskey 85MD, and have a Ferguson JR and LS that I use.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
jph
Posts: 110
Joined: Thu Jun 21, 2018 5:30 am
Location: Richmond, Virginia

Re: What tenor and bass mouthpieces are you using?

Post by jph »

Tenor: Hammond 10ML, MXL...and for bass on tenor, a Yamaha 58.
Bass: Hammond 20BL and a Benge 59. As Chad Arnow indicated prior, the small 3 / big 4 rim diameter size suits me best on tenor, although I do keep a Faxx 4G (old-sized Bach) and 6.5AL in the closet.
Last edited by jph on Mon Sep 21, 2020 10:03 am, edited 2 times in total.
User avatar
dukesboneman
Posts: 636
Joined: Mon Apr 02, 2018 4:40 pm
Location: Sarasota, Florida
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by dukesboneman »

I`ve recently made a "Covid stay at home" change .
I acquired a Mount Vernon Bach 12C and a 12. I`m loving the sound and control.
For my 36 - 7C
36B - Elliott 98/E
42BO - 98/F/F* - I just tried Doug`s new F* backbore - WOW !!!! great Sound.
User avatar
ArbanRubank
Posts: 424
Joined: Sat Feb 23, 2019 7:50 am
Location: Pittsburgh, PA

Re: What tenor and bass mouthpieces are you using?

Post by ArbanRubank »

I'm experimenting using my single-trigger bass as a multi-purpose tenor and bass - both with a Bach 3G mpc. For what I want to do, it seems to work well. Kinda nice to play a high ballad and then turn around and play a low ballad (or the same one down an octave) without having to switch horns and/or mpcs. Also kinda nice to do big octave jumps within a ballad. And Rochut really sings on it.

I was hesitant at first, but then I figured it's only me playing in my music studio and if Curtis Fuller & Slide Hampton could use a large tenor in public where others were using small tenors - why not experiment with taking it a step further.

OTOH, if I was going to do a multi-track, then I would want to get more timbre separation by using the "correct" equipment for each part.
ParLawGod
Posts: 123
Joined: Sun Mar 10, 2019 10:01 pm

Re: What tenor and bass mouthpieces are you using?

Post by ParLawGod »

Small Tenor: Bach 6.5AL (tried nearly everything out there, and I just always seem to go back to it)

Medium Tenor: Bach 5 and Bach 5GS

Large Tenor: Doug Elliott 104N/G/G8

Bass: Schilke 58 (I find my articulations on this one much better than my Bach 1.5G). I also have a bigger Doug Elliott I keep around for anytime our orchestra has a pops concert (hellooooooo, John Williams).

Euph: Doug Elliott 104N/I/I8
User avatar
Savio
Posts: 449
Joined: Thu Apr 26, 2018 5:23 pm

Re: What tenor and bass mouthpieces are you using?

Post by Savio »

I play the Symington 1.5. Have been a little back an forward on the Bach 1 1/2g Mt Vernon but they are in the same ballpark. Anyway, here is a little piece my daughter 9 years old demands me to play. An Elvis Presley song "Cant help falling in love" on the Symington 1.5. (She is an Elvis "fan") I admit its a little boring compared to Elvis .... :D


https://1drv.ms/u/s!AnFhNyFesmcYhdZOvmq ... w?e=1FR3Mw
Jmindeman
Posts: 340
Joined: Sun May 20, 2018 1:33 pm
Location: Macomb, IL
Contact:

Re: What tenor and bass mouthpieces are you using?

Post by Jmindeman »

Small bore: King M31 on a Conn 4H
Large Bore: Bob Reeves Gladstone 5G on a King 4B
imsevimse
Posts: 1408
Joined: Sun Apr 29, 2018 10:43 am
Location: Sweden

Re: What tenor and bass mouthpieces are you using?

Post by imsevimse »

Savio wrote: Sat Sep 05, 2020 10:35 am I play the Symington 1.5. Have been a little back an forward on the Bach 1 1/2g Mt Vernon but they are in the same ballpark. Anyway, here is a little piece my daughter 9 years old demands me to play. An Elvis Presley song "Cant help falling in love" on the Symington 1.5. (She is an Elvis "fan") I admit its a little boring compared to Elvis .... :D


https://1drv.ms/u/s!AnFhNyFesmcYhdZOvmq ... w?e=1FR3Mw
Nice!

/Tom
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: What tenor and bass mouthpieces are you using?

Post by Posaunus »

Savio wrote: Sat Sep 05, 2020 10:35 am ... here is a little piece my daughter 9 years old demands me to play. An Elvis Presley song "Cant help falling in love" on the Symington 1.5.
https://1drv.ms/u/s!AnFhNyFesmcYhdZOvmq ... w?e=1FR3Mw
Very nice, Leif! :good:
FOSSIL
Posts: 685
Joined: Tue Jul 09, 2019 8:41 am

Re: What tenor and bass mouthpieces are you using?

Post by FOSSIL »

Very nice Leif. 70H ?

Chris
mrdeacon
Posts: 968
Joined: Tue May 08, 2018 2:05 am
Location: Los Angeles, California

Re: What tenor and bass mouthpieces are you using?

Post by mrdeacon »

Savio wrote: Sat Sep 05, 2020 10:35 am I play the Symington 1.5. Have been a little back an forward on the Bach 1 1/2g Mt Vernon but they are in the same ballpark. Anyway, here is a little piece my daughter 9 years old demands me to play. An Elvis Presley song "Cant help falling in love" on the Symington 1.5. (She is an Elvis "fan") I admit its a little boring compared to Elvis .... :D


https://1drv.ms/u/s!AnFhNyFesmcYhdZOvmq ... w?e=1FR3Mw
The Symington is a really special piece! Glad you were able to get one from Bill!

I'm assuming you're using one in brass?
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
User avatar
Savio
Posts: 449
Joined: Thu Apr 26, 2018 5:23 pm

Re: What tenor and bass mouthpieces are you using?

Post by Savio »

FOSSIL wrote: Sat Sep 05, 2020 11:33 am Very nice Leif. 70H ?

Chris
Yes Chris, the one you tried!
User avatar
Savio
Posts: 449
Joined: Thu Apr 26, 2018 5:23 pm

Re: What tenor and bass mouthpieces are you using?

Post by Savio »

mrdeacon wrote: Sat Sep 05, 2020 11:35 am
Savio wrote: Sat Sep 05, 2020 10:35 am I play the Symington 1.5. Have been a little back an forward on the Bach 1 1/2g Mt Vernon but they are in the same ballpark. Anyway, here is a little piece my daughter 9 years old demands me to play. An Elvis Presley song "Cant help falling in love" on the Symington 1.5. (She is an Elvis "fan") I admit its a little boring compared to Elvis .... :D


https://1drv.ms/u/s!AnFhNyFesmcYhdZOvmq ... w?e=1FR3Mw
The Symington is a really special piece! Glad you were able to get one from Bill!

I'm assuming you're using one in brass?
Yes, its brass. Dont have money to try the another ones right now.

Leif
Basbasun
Posts: 494
Joined: Mon Mar 26, 2018 3:03 am

Re: What tenor and bass mouthpieces are you using?

Post by Basbasun »

Beautiful Leif!
User avatar
Mv2541
Posts: 557
Joined: Thu Mar 29, 2018 10:07 am
Location: New Jersey

Re: What tenor and bass mouthpieces are you using?

Post by Mv2541 »

dukesboneman wrote: Fri Sep 04, 2020 12:40 pm I`ve recently made a "Covid stay at home" change .
I acquired a Mount Vernon Bach 12C and a 12. I`m loving the sound and control.
For my 36 - 7C
36B - Elliott 98/E
42BO - 98/F/F* - I just tried Doug`s new F* backbore - WOW !!!! great Sound.
I'll second that Doug's newer shank designs are ludacrisly good.
Software Developer/Educator
JP Rath 236 - XT L101 C+/AS
Bach LT16M - XT L101 C+/D3
Bach 36BO - XT L101 E/E4
Edwards T396 - XT L101 F+/G8
Courtois 502 - LB L114 L/L8
User avatar
sacfxdx
Posts: 324
Joined: Wed Apr 11, 2018 4:25 pm
Location: North Georgia, US

Re: What tenor and bass mouthpieces are you using?

Post by sacfxdx »

dukesboneman wrote: Fri Sep 04, 2020 12:40 pm I`ve recently made a "Covid stay at home" change .
I acquired a Mount Vernon Bach 12C and a 12. I`m loving the sound and control.
Gee I wonder where you got that 12C from. Glad you are liking it.
Steve
Driswood
Posts: 228
Joined: Sat Mar 24, 2018 4:59 am
Location: Palm Harbor, FL

Re: What tenor and bass mouthpieces are you using?

Post by Driswood »

DE LT100L/C/C2 in a Conn 6H
Jerry Walker

Happily Retired :good:

1957 Conn 6H
Schilke 47B
1989 Yamaha YSL-684G
Bach 6 3/4C
Kdanielsen
Posts: 461
Joined: Sun Jul 28, 2019 9:35 pm
Location: New England

Re: What tenor and bass mouthpieces are you using?

Post by Kdanielsen »

Thein alto: 15cl/13cl

Edwards large tenor: Griego Alessi 4D w/ DE 104N rim

Edwards bass: Griego GP6
Kris Danielsen D.M.A.

Westfield State University and Keene State College
Lecturer of Low Brass

Principal Trombone, New England Repertory Orchestra
2nd Trombone, Glens Falls Symphony
yhc
Posts: 31
Joined: Fri Dec 06, 2019 11:54 am

Re: What tenor and bass mouthpieces are you using?

Post by yhc »

Hello. I am using:
King Sonorus 42 tenor trombone with A Griego 5M.
Conn 70H 1928 bass trombone with Yamaha 59L-GP & Griego 2. Dillon valve trombone with Bach 6 1/2A
Last edited by yhc on Wed Nov 25, 2020 9:32 am, edited 2 times in total.
Andyc
Posts: 56
Joined: Wed Jun 24, 2020 12:36 pm

Re: What tenor and bass mouthpieces are you using?

Post by Andyc »

Small Tenor DE XT MN103/D/D2
Large Tenor: DE XT MN103/G*/G8
Post Reply

Return to “Mouthpieces”