7.5" bell for Conn 6-H

Post Reply
Shumanbean
Posts: 83
Joined: Fri May 22, 2020 11:12 am
Location: Louisville

7.5" bell for Conn 6-H

Post by Shumanbean »

I have a 6H, vintage 1952, with an 8" bell. The slide was rebuilt by Dana Hofer, and is very nice. I want to try that slide with a 7.5 bell. My understanding is that Conn made the horn with that bell until about 1950, but I don't know that to be a fact. So my question is whether a 7.5" Conn 6H bell even exists, and if not, is there a nice, comparable bell that would interchange without having to modify?
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: 7.5" bell for Conn 6-H

Post by Posaunus »

Thrawn22
Posts: 1278
Joined: Wed Sep 05, 2018 10:18 pm

Re: 7.5" bell for Conn 6-H

Post by Thrawn22 »

Shumanbean wrote: Wed Feb 10, 2021 5:03 pm I have a 6H, vintage 1952, with an 8" bell. The slide was rebuilt by Dana Hofer, and is very nice. I want to try that slide with a 7.5 bell. My understanding is that Conn made the horn with that bell until about 1950, but I don't know that to be a fact. So my question is whether a 7.5" Conn 6H bell even exists, and if not, is there a nice, comparable bell that would interchange without having to modify?
You and me both.
6H (K series)
6H (early 60s)
4H/5H custom bell
78H ('53)
78H (K series)
78H/36BG /2547 slide
8H
88HN
71H (dependant valves)
72H
35H alto (K series)
modelerdc
Posts: 275
Joined: Thu May 03, 2018 9:34 pm

Re: 7.5" bell for Conn 6-H

Post by modelerdc »

Conn 77H bell is 7 1/2 inches and fits. Actually the 77H was sold as a step up horn, but is very similar to the 6H. Same bore slide .500 inch, most parts of the two horns are the same, but 77H less nickel trim, doesn't so called reversed tuning slide, and the smaller bell. I have one and the sound is bright, clear and less broad than the 6H. You can also find a 77H for less than a good 6H.
Shumanbean
Posts: 83
Joined: Fri May 22, 2020 11:12 am
Location: Louisville

Re: 7.5" bell for Conn 6-H

Post by Shumanbean »

Much obliged, modelerdc.
droffilcal
Posts: 76
Joined: Wed Aug 08, 2018 9:41 am

Re: 7.5" bell for Conn 6-H

Post by droffilcal »

Don’t discount an old Conn Director bell! I have a couple of Director bells that play great with a (admittedly great playing) 4H slide.
Post Reply

Return to “Modification & Repair”