D attachment of 62H

Post Reply
User avatar
hurry
Posts: 10
Joined: Mon May 21, 2018 8:07 am
Location: Tokyo, Japan
Contact:

D attachment of 62H

Post by hurry »

I play bass trombone as well as tenor, small and large shank.
Usually I do with single valve like ybl321. but on some music it's better to use second.

So I am looking for D attachment of my conn 62H Elkhart which has F and E crook now.
Do you have any idea where to buy a D crook or who sell it to me or nice teck to make one for me?

regards,
hurry
hurry, not in a hurry
Bach5G
Posts: 2270
Joined: Sat Apr 07, 2018 6:10 pm

Re: D attachment of 62H

Post by Bach5G »

Benn Hansen in Seattle.
imsevimse
Posts: 1408
Joined: Sun Apr 29, 2018 10:43 am
Location: Sweden

Re: D attachment of 62H

Post by imsevimse »

At a time there was something called "The Stauffer D-slide" that was sold by the Horn Guys and fit both the 62h and the 73h. I bought one to fit my 73H. When I several years later asked them to sell me another to fit my 62h I was told they were not made anymore. I asked around but could not find another provider of the D-slide. The solution was to visit Lars Gerdts Music in Stockholm (Sweden) and have him make me a D-slide for my horn. It was rather expensive because he had to make tools and also order the pipes of right dimension from Germany. I think he has saved the drawings and specifications to be able to make more if required. Since you are in Tokyo you probably have a repairman more close to you but I guess Lars Gerdt could make one and send it to you if you can afford it. My D-slide fits perfectly.

You can see my 73h and 62h with their d-slides in the first post in this thread
https://www.trombonechat.com/viewtopic.php?f=13&t=10697

/Tom
tbonesullivan
Posts: 1461
Joined: Tue Jul 02, 2019 9:06 am
Location: New Jersey
Contact:

Re: D attachment of 62H

Post by tbonesullivan »

Well, if you don't want to keep the E-slide, the easiest thing would be to turn that into a D slide. They would pretty much need to custom bend the whole thing, using probably .678" tubing.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
User avatar
elmsandr
Posts: 957
Joined: Fri Mar 23, 2018 2:43 pm
Location: S.E. Michigan
Contact:

Re: D attachment of 62H

Post by elmsandr »

tbonesullivan wrote: Wed Jan 08, 2020 3:25 pm Well, if you don't want to keep the E-slide, the easiest thing would be to turn that into a D slide. They would pretty much need to custom bend the whole thing, using probably .678" tubing.
I think if you went to 100 of the top techs for this, I don't think any of them would do this. Not many folks bend tubes unless they are tuba guys or they have to.

Buy a couple of bends and some straight tubes and tada.. a D attachment. Hard part is getting the parts in a reasonable time.

And the ID is somewhere around .593" or so.

Cheers,
Andy
tbonesullivan
Posts: 1461
Joined: Tue Jul 02, 2019 9:06 am
Location: New Jersey
Contact:

Re: D attachment of 62H

Post by tbonesullivan »

Oops... meant .578. but yes now I see that most of the bass attachments have .593 ID. If only it was an Eb crook, then it would probably have the bends needed, and would just need straight tubing added.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
hornbuilder
Posts: 854
Joined: Wed May 02, 2018 9:20 pm

Re: D attachment of 62H

Post by hornbuilder »

It really isn't that difficult to do. If you have the parts.
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Post Reply

Return to “Accessories”