Hi guys!
Does anyone know what the bell brace tube diameter is for a Holton bass? Seems like a Bach size... but are the Holton tubes a little larger? The .383 Conn size clamp I received was definitely the wrong size.
Thanks!
Which Ax Handle for a Holton?
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Which Ax Handle for a Holton?
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
- Splendour
- Posts: 36
- Joined: Thu Jul 26, 2018 10:05 am
Re: Which Ax Handle for a Holton?
I sold my TR181 a few years ago so I'm afraid I don't know the exact size. I used a Rath hand support which suited my large hands the best.
-
- Posts: 722
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Which Ax Handle for a Holton?
Just measured my front brace at 0.445"
Eric
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Which Ax Handle for a Holton?
You're amazing Eric! I'm assuming this measurement was taken off of a TR181? I think the .437 clamp should work then.... hopefully...
If you end up being bored today... could you measure a Bach 42 or Bach 50 and like a Shires or Yamaha (whatever you've got lying around in the shop) that would be amazing! I realize these measurements are already on the Instrument Innovations website but I just want to see how they compare to your measurements.
These measurements are near impossible to take when all you have for a measuring device is a tailoring tape haha.
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
-
- Posts: 722
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Which Ax Handle for a Holton?
HA!!!!! Not amazing when I mess with this stuff all day...yes that's from my 181 and yes the 0.437 should work.mrdeacon wrote: ↑Thu Apr 30, 2020 12:54 pmYou're amazing Eric! I'm assuming this measurement was taken off of a TR181? I think the .437 clamp should work then.... hopefully...
If you end up being bored today... could you measure a Bach 42 or Bach 50 and like a Shires or Yamaha (whatever you've got lying around in the shop) that would be amazing! I realize these measurements are already on the Instrument Innovations website but I just want to see how they compare to your measurements.
These measurements are near impossible to take when all you have for a measuring device is a tailoring tape haha.
Bach and Shires braces are around 0.417" +/- 0.002", Not sure about Yamaha, but I'll bet Mike or Kim at Instrument Innovations would know.
You can get a decent caliper relatively cheap at Harbor Freight. Come in pretty handy!!
Eric
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Which Ax Handle for a Holton?
For anyone curious. I got two more clamps in today! .420 and .437. Fun fact. Neither fit!
What's very interesting is the .437 was a perfect fit on my tuning slide but my bell brace seems to be supersized. It's just a hair larger than .437. The bottom half of the clamp more or less fits but the top clamp is a touch too small. Like .01 or .02 too small. I think the size is somewhere in between their .437 and .469 clamps.
I'm going to take it to my tech later this week and see if he can modify the clamp to fit. If he can't I'll talk to Mike and Kim and see if I can get something custom made! I think part of my issue is the fact I've got a 169. With Holton's legendary consistency, especially back in the Pre LeBlanc days... only God knows what size this part is actually supposed to be.
Their service has been incredible so far and I see no reason for that to change!
I'll continue to update the thread with my findings...
What's very interesting is the .437 was a perfect fit on my tuning slide but my bell brace seems to be supersized. It's just a hair larger than .437. The bottom half of the clamp more or less fits but the top clamp is a touch too small. Like .01 or .02 too small. I think the size is somewhere in between their .437 and .469 clamps.
I'm going to take it to my tech later this week and see if he can modify the clamp to fit. If he can't I'll talk to Mike and Kim and see if I can get something custom made! I think part of my issue is the fact I've got a 169. With Holton's legendary consistency, especially back in the Pre LeBlanc days... only God knows what size this part is actually supposed to be.
Their service has been incredible so far and I see no reason for that to change!
I'll continue to update the thread with my findings...
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Which Ax Handle for a Holton?
Saw my tech today! They were able to hand fit the clamp to the brace.
It was some weird tweener size.
So for anyone out there that stumbles on this thread. A .437 clamp should work on a Holton. If it doesn't it's a size in between .437 and .469 and you'll have to have a tech modify a .437 clamp to fit.
I'm happy!
It was some weird tweener size.
So for anyone out there that stumbles on this thread. A .437 clamp should work on a Holton. If it doesn't it's a size in between .437 and .469 and you'll have to have a tech modify a .437 clamp to fit.
I'm happy!
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
-
- Posts: 1282
- Joined: Wed Sep 05, 2018 10:18 pm
Re: Which Ax Handle for a Holton?
mrdeacon wrote: ↑Tue May 05, 2020 12:33 pm Saw my tech today! They were able to hand fit the clamp to the brace.
It was some weird tweener size.
So for anyone out there that stumbles on this thread. A .437 clamp should work on a Holton. If it doesn't it's a size in between .437 and .469 and you'll have to have a tech modify a .437 clamp to fit.
I'm happy!
Or dont buy Holtons?
6H (K series)
6H (early 60s)
4H/5H custom bell
78H ('53)
78H (K series)
78H/36BG /2547 slide
8H
88HN
71H (dependant valves)
72H
35H alto (K series)
6H (early 60s)
4H/5H custom bell
78H ('53)
78H (K series)
78H/36BG /2547 slide
8H
88HN
71H (dependant valves)
72H
35H alto (K series)
- spencercarran
- Posts: 628
- Joined: Sat Oct 17, 2020 1:02 pm
- Location: Chicago