What is this monstrosity?
-
- Posts: 1819
- Joined: Mon Mar 02, 2020 6:18 am
What is this monstrosity?
https://www.ebay.com/itm/233609393426 What is that? How does it work? Anyone had experience with an adjustable cup?
- paulyg
- Posts: 684
- Joined: Thu May 17, 2018 12:30 pm
Re: What is this monstrosity?
Adjustable cup mouthpieces are mentioned in Ed Kleinhammer's "The Art of Trombone Playing." Some of them look like this.
I'd try before I buy, especially for ~$300.
The modern (and cheaper, and better) approach is to have a screw rim and a couple underparts.
I'd try before I buy, especially for ~$300.
The modern (and cheaper, and better) approach is to have a screw rim and a couple underparts.
Paul Gilles
Aerospace Engineer & Trombone Player
Aerospace Engineer & Trombone Player
- Doug Elliott
- Posts: 3095
- Joined: Wed Mar 21, 2018 10:12 pm
- Location: Maryand
Re: What is this monstrosity?
There are a bunch of patents from the early to mid 1900's on adjustable cup mouthpieces. Some are spring operated so they get shallower when you use more mouthpiece pressure.
I haven't seen this particular one.
The whole idea doesn't really work very well.
I haven't seen this particular one.
The whole idea doesn't really work very well.
"I know a thing or two because I've seen a thing or two."
-
- Posts: 1452
- Joined: Sun Apr 29, 2018 10:43 am
- Location: Sweden
Re: What is this monstrosity?
I think I would not want a cup that changes by itself depending on pressure. It is hard to play anyway.
/Tom
/Tom
-
- Posts: 1501
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: What is this monstrosity?
Did anybody make a cup insert?
The modular screw rim and cup swap makes sense but I've wondered if you could just make the cup really deep then snap in inserts until you're shallow enough. It seems like that would have beee a logical evolutionary step on the way to the modular.
The modular screw rim and cup swap makes sense but I've wondered if you could just make the cup really deep then snap in inserts until you're shallow enough. It seems like that would have beee a logical evolutionary step on the way to the modular.
-
- Posts: 76
- Joined: Wed Jan 02, 2019 1:38 pm
Re: What is this monstrosity?
Scott Hartman's mouthpiece system addresses this by having threads outside the cup and shank, and having threaded rings of different weights. It's really interesting to hear the different effects between two weights that are only 1/8 of an inch apart in width.
-
- Posts: 354
- Joined: Sun Mar 25, 2018 1:10 pm
- Location: Pennsylvania
Re: What is this monstrosity?
How about this 1 1/2G adjustable cup from Giardinelli in the late 60's ? It worked great !
You do not have the required permissions to view the files attached to this post.
-
- Posts: 231
- Joined: Thu Oct 25, 2018 5:11 am
- Location: Somerset, UK
Re: What is this monstrosity?
I have a Stomvi "Comby System" which is a rim (gold plated) a deep body and 2 shanks- 1 large and 1 small. There are then 5 gold plated cups of varying depths. The 12 rims go from28.57mm to 23.54mm which are equivalent to Bach 1 to 22.timothy42b wrote: ↑Mon Jun 08, 2020 6:38 am Did anybody make a cup insert?
The modular screw rim and cup swap makes sense but I've wondered if you could just make the cup really deep then snap in inserts until you're shallow enough. It seems like that would have beee a logical evolutionary step on the way to the modular.
Mine has a 4 rim which is between a Bach 4 and 5 and I am working with the medium C cup and the shallow E cup at present. I have only been able to try it at home because of the lock down but it seems to be working quite well.
Cheers and stay safe
Stewbones43
Conn 36H(Pitched in D/A)
B&H Sessionair
Besson 10-10
Conn 74H
Yamaha YSL-641 with Yamaha Custom Slide
Conn 88H Gen II with Conn SL4747 Slide
Besson Academy 409
Rath/Holton/Benge Bb/F/G or Gb/Eb or D Independent Bass
B&H Sessionair
Besson 10-10
Conn 74H
Yamaha YSL-641 with Yamaha Custom Slide
Conn 88H Gen II with Conn SL4747 Slide
Besson Academy 409
Rath/Holton/Benge Bb/F/G or Gb/Eb or D Independent Bass
-
- Posts: 1505
- Joined: Tue Jul 02, 2019 9:06 am
- Location: New Jersey
- Contact:
Re: What is this monstrosity?
I haven't seen it much with trombone mouthpieces, but Houser Tuba mouthpieces have delrin "extenders" that allow one to tweak the cup depth of their modular mouthpieces.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
- Doug Elliott
- Posts: 3095
- Joined: Wed Mar 21, 2018 10:12 pm
- Location: Maryand
Re: What is this monstrosity?
Many years ago I tried making extender rings to go one size deeper, and decided that it really didn't work well enough for what I wanted. When you take a good mouthpiece and change the depth but keep the shape the same, it really only makes it play badly. Kind of like the usual effect of drilling the throat bigger.
"I know a thing or two because I've seen a thing or two."
-
- Posts: 549
- Joined: Tue Jan 01, 2019 4:33 pm
- Location: Germany
- Contact:
Re: What is this monstrosity?
If I see it correctly, Laetzsch mouthpieces have an interesting concept here.
They seem to allow varying cup depth to a degree by using different rims, e.g.:
https://www.xn--ltzsch-shop-l8a.com/en/ ... mbone.html
I have never played these mouthpieces myself, but would hope that they know what they do, looking at the prices...
They seem to allow varying cup depth to a degree by using different rims, e.g.:
https://www.xn--ltzsch-shop-l8a.com/en/ ... mbone.html
I have never played these mouthpieces myself, but would hope that they know what they do, looking at the prices...
Markus Starke
https://www.mst-studio-mouthpieces.com/
Alto: Conn 35h, Kanstul, Weril
Tenor: 2x Conn 6h, Blessing medium, Elkhart 88H, 88HT, Greenhoe 88HT, Heckel, Piering replica
Bass: Conn 112h/62h, Greenhoe TIS, Conn 60h/"62h"
https://www.mst-studio-mouthpieces.com/
Alto: Conn 35h, Kanstul, Weril
Tenor: 2x Conn 6h, Blessing medium, Elkhart 88H, 88HT, Greenhoe 88HT, Heckel, Piering replica
Bass: Conn 112h/62h, Greenhoe TIS, Conn 60h/"62h"
-
- Posts: 1505
- Joined: Tue Jul 02, 2019 9:06 am
- Location: New Jersey
- Contact:
Re: What is this monstrosity?
The thing with that, like with the delrin inserts, is that you are pretty much extending it into a cylinder. It doesn't have the nice taper and shape you'd get with a fully threaded rim.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, B&H Eb Tuba, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
- harrisonreed
- Posts: 4773
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: What is this monstrosity?
The shape of the cup is very important. Arbitrarily deepening it is probably not going to work
-
- Posts: 1501
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: What is this monstrosity?
Years ago I tried filling a cup with wax and scraping it out a layer at a time.
The results weren't good. On the other hand my playing was pretty bad then too, just coming back from a couple decades off, so who knows?
The results weren't good. On the other hand my playing was pretty bad then too, just coming back from a couple decades off, so who knows?
- harrisonreed
- Posts: 4773
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: What is this monstrosity?
This is sort of how Denis Wick got into mouthpiece design.timothy42b wrote: ↑Wed Jun 10, 2020 6:32 am Years ago I tried filling a cup with wax and scraping it out a layer at a time.
The results weren't good. On the other hand my playing was pretty bad then too, just coming back from a couple decades off, so who knows?
-
- Posts: 1501
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: What is this monstrosity?
Wait...............by playing badly????????????harrisonreed wrote: ↑Wed Jun 10, 2020 7:43 amThis is sort of how Denis Wick got into mouthpiece design.timothy42b wrote: ↑Wed Jun 10, 2020 6:32 am Years ago I tried filling a cup with wax and scraping it out a layer at a time.
The results weren't good. On the other hand my playing was pretty bad then too, just coming back from a couple decades off, so who knows?
- harrisonreed
- Posts: 4773
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: What is this monstrosity?
No haha! But he used an additive technique with some sort of coating in the cup of a mouthpiece, and then carved away at it until he had his 4AL or whatever his signature piece was.
-
- Posts: 377
- Joined: Mon Jan 07, 2019 8:56 pm
Re: What is this monstrosity?
Elow, when you mentioned monstrosity, I thought of this:
Current instruments:
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
- Cotboneman
- Posts: 201
- Joined: Fri Jul 27, 2018 4:16 pm
- Location: Tucson, AZ
- Contact:
Re: What is this monstrosity?
As a quick background on this thread I remember an adjustable cup trumpet mouthpiece, first produced by Walter Sarad back in the early 1960's. If memory serves me I think these mouthpieces were originally meant for trumpet teachers to work with their students in finding a good cup depth for them. Much later, in the 1990's I was given one as a gift by a local music store that I did a lot of business with. It was terrible in so many ways, but it was certainly a great conversation starter for brass players. It was serving as a paperweight on my band office desk when it disappeared over one summer break. I never found out who took it.
- dukesboneman
- Posts: 656
- Joined: Mon Apr 02, 2018 4:40 pm
- Location: Sarasota, Florida
- Contact:
Re: What is this monstrosity?
I had a Sarad adjustable cup. Rim was about a Bach7. At it`s deepest it was around a Bach depth.
At it`s shallowest it was around a Bach 12E.
If you had OCD, This mouthpiece would drive you nuts
At it`s shallowest it was around a Bach 12E.
If you had OCD, This mouthpiece would drive you nuts