Brass polish recommendation
- dukesboneman
- Posts: 715
- Joined: Mon Apr 02, 2018 4:40 pm
- Location: Sarasota, Florida
- Contact:
Brass polish recommendation
I just bought on old Oval shaped Baritone horn. It plays great.
3 Rotary valves all work, slide all pull ,but it`s raw brass and very tarnished.
What`s a good brass polish?
3 Rotary valves all work, slide all pull ,but it`s raw brass and very tarnished.
What`s a good brass polish?
- DaveAshley
- Posts: 183
- Joined: Wed Aug 01, 2018 9:37 pm
- Location: Kentucky
Re: Brass polish recommendation
My favorite is Mr. Metal.
-
- Posts: 1308
- Joined: Wed Sep 05, 2018 10:18 pm
Re: Brass polish recommendation
Blue Magic.
6H (K series)
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
- Vegastokc
- Posts: 208
- Joined: Fri Jun 15, 2018 7:46 am
- Location: Rock Hill, SC
Re: Brass polish recommendation
Good old Brasso works well.
But it is quite messy.
And it requires a lot of rags and plenty of ventilation.
So on second thought maybe I should try one of the recommendations myself.
But it is quite messy.
And it requires a lot of rags and plenty of ventilation.
So on second thought maybe I should try one of the recommendations myself.
Michael Saffier
I ate twice as much lasagna as I should have...
I ate twice as much lasagna as I should have...
-
- Posts: 745
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Brass polish recommendation
Brasso is not good for the brass as some formulations contain ammonia.
Best bet is Meguires car polish, but make sure it contains NO abrasives!!
Best bet is Meguires car polish, but make sure it contains NO abrasives!!
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
-
- Posts: 460
- Joined: Wed Jul 11, 2018 1:51 pm
- Location: New Albany, Ohio
Re: Brass polish recommendation
Wright's brass polish.
Dave
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
- spencercarran
- Posts: 639
- Joined: Sat Oct 17, 2020 1:02 pm
- Location: Chicago
Re: Brass polish recommendation
+1 for Wright's.
Once you remove that big coat of tarnish, periodic applications of lemon Pledge do pretty well at keeping the brass clean and nice-looking.
Once you remove that big coat of tarnish, periodic applications of lemon Pledge do pretty well at keeping the brass clean and nice-looking.
-
- Posts: 393
- Joined: Mon Jan 07, 2019 8:56 pm
Re: Brass polish recommendation
I use Flitz liquid... sparingly. A little goes a long way. Brasso may not be as bad as some say, but its smell is overwhelming.
Current instruments:
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
-
- Posts: 238
- Joined: Mon May 28, 2018 10:00 pm
Re: Brass polish recommendation
If my horns had more exposed brass than they do (my skin doesn't eat through lacquer, it seems), I'd probably end up using more of my Wright's brass polish than just on the inner tubes. Nonetheless, that would be my go to on a raw instrument.
Kevin Afflerbach
'57 Conn 6H, Warburton 9M/9D/T3★
'62 Holton 168, Bach 5GL
Getzen 1052FD Eterna, Pickett 1.5S
F. Schmidt 2103 BBb Tuba, Laskey 30G
Wessex Tubas TE360P Bombino, Perantucci PT-84-S
John Packer JP274MKII Euphonium, Robert Tucci RT-7C
'57 Conn 6H, Warburton 9M/9D/T3★
'62 Holton 168, Bach 5GL
Getzen 1052FD Eterna, Pickett 1.5S
F. Schmidt 2103 BBb Tuba, Laskey 30G
Wessex Tubas TE360P Bombino, Perantucci PT-84-S
John Packer JP274MKII Euphonium, Robert Tucci RT-7C
-
- Posts: 196
- Joined: Mon Jul 13, 2020 3:33 pm
-
- Posts: 624
- Joined: Tue Jan 22, 2019 2:52 pm
- Contact:
-
- Posts: 589
- Joined: Thu Jan 17, 2019 7:45 am
Re: Brass polish recommendation
The guys in the buffing room at the King Factory used Brasso. When I used to do polish & lacquer overhauls I switched to Silvo. Made by the Brasso company but much finer.
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Brass polish recommendation
"Non-abrasive polish" is nonsense. You're not dissolving metal oxides using solvents alone - if it's a product you rub on the object, it's abrasive. Some products are more abrasive than others. Blue Magic? 25-35% aluminium oxide.
Renaissance Wax afterwards if you want to keep it bright.
Renaissance Wax afterwards if you want to keep it bright.
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Brass polish recommendation
Protective wax option for your polished brass: Eagle One Superior Nanowax - carnauba wax in an easy-to-apply spray bottle. Works great on car finishes, furniture, kitchen cabinets, floors, glass, ... This stuff will maintain the shiny surface you have created - effective, long-lasting.
https://www.eagleone.com/all-surface-nanowax-spray
Note: It's also pretty effective at creating a (relatively) smooth slide on a plastic P-bone or Tromba trombone. Remove all the roughness from the brass stockings with a gentle abrasive (stockings only!); finish with fine (4-0) steel wool. Then spray the plastic inner slides and stockings with Nanowax and wipe dry with a microfiber cloth. You probably won't need any further slide lubricant or even water spray. [Of course you will never achieve 10/10 slide action on these instruments. ]
https://www.eagleone.com/all-surface-nanowax-spray
Note: It's also pretty effective at creating a (relatively) smooth slide on a plastic P-bone or Tromba trombone. Remove all the roughness from the brass stockings with a gentle abrasive (stockings only!); finish with fine (4-0) steel wool. Then spray the plastic inner slides and stockings with Nanowax and wipe dry with a microfiber cloth. You probably won't need any further slide lubricant or even water spray. [Of course you will never achieve 10/10 slide action on these instruments. ]
- Savio
- Posts: 495
- Joined: Thu Apr 26, 2018 5:23 pm
Re: Brass polish recommendation
I wonder if regular brass polish will tear down the instrument lacquer? Maybe car polish is better since it's told to protect?
Leif
Leif
- BGuttman
- Posts: 6295
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Brass polish recommendation
Brass polish (or even silver polish or toothpaste) will abrade the lacquer.
Auto polishes are intended to be gentle to paint, so it might work well if only the lacquer is scratched.
Auto polishes are intended to be gentle to paint, so it might work well if only the lacquer is scratched.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Brass polish recommendation
PLEASE do NOT use brass polish on a lacquered instrument!
Decades ago, I followed the lead of a fellow student trombonist and scrubbed the bell, etc. of my almost-new trombone with Brasso. Looked great for a few days - then it started to tarnish. I ruined the appearance of this once-fine trombone. I still regret my error to this day!
Decades ago, I followed the lead of a fellow student trombonist and scrubbed the bell, etc. of my almost-new trombone with Brasso. Looked great for a few days - then it started to tarnish. I ruined the appearance of this once-fine trombone. I still regret my error to this day!
-
- Posts: 624
- Joined: Tue Jan 22, 2019 2:52 pm
- Contact:
Re: Brass polish recommendation
I stand corrected.
In the case of Blue Magic, the abrasives are so fine that I can blend unlacquered and epoxy-lacquered areas with no visible damage whatsoever to the surrounding epoxy lacquer.
Last edited by biggiesmalls on Sun May 23, 2021 9:31 am, edited 1 time in total.
-
- Posts: 38
- Joined: Wed Apr 07, 2021 5:33 pm
- Location: North Dakota
Re: Brass polish recommendation
I use Mothers Mag and aluminum polish on my Olds which has been stripped. I have also used it on my Yamaha 643 to bring the shine back to spots on the nickel outer slide where the lacquer is missing. A bit messy but easy to use and not, as far as I understand, abrasive.
-
- Posts: 138
- Joined: Sat May 05, 2018 7:10 pm
Re: Brass polish recommendation
My repairmen recommends a polish called Wenol. You can get it from Amazon.
- jonphilpott
- Posts: 24
- Joined: Thu Feb 10, 2022 9:25 am
Re: Brass polish recommendation
I'd like to give my endorsement to Mother's mag on a stripped olds, here's a pic of the results!lupusargentus wrote: ↑Sat May 15, 2021 2:48 pm I use Mothers Mag and aluminum polish on my Olds which has been stripped. I have also used it on my Yamaha 643 to bring the shine back to spots on the nickel outer slide where the lacquer is missing. A bit messy but easy to use and not, as far as I understand, abrasive.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2
- Joined: Tue Mar 22, 2022 9:02 pm
Re: Brass polish recommendation
I always used Brasso. Am I old or what.
- BGuttman
- Posts: 6295
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Brass polish recommendation
Brasso is a bit more abrasive than some of the other things mentioned. In a lot of cases we are looking for a mirror-like shine with very little loss of metal.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
-
- Posts: 208
- Joined: Mon Apr 30, 2018 12:14 pm
Re: Brass polish recommendation
Get a cream for brass- Wrights? The brasso leaves so much residue. Takes a long time to get that out. For your slide: Wrap a cheesecloth tight and use the wrights on the inner slide- better yet, I took a long gun brush and cut the wire handle end and stuck it in a hand drill- Just pour the cream on the brush and work up a nice lather! For cleaning out the handslide crook, fill it with warm soapy water and put it in the corner of the bathroom for the weekend. Monday pour it into the toilet and notice all the crap that was growing there! Who cars with the bell looks like, the slide works great!
-
- Posts: 138
- Joined: Sat May 05, 2018 7:10 pm
-
- Posts: 265
- Joined: Sat Oct 26, 2019 9:23 pm
- Location: Kansas City
Re: Brass polish recommendation
I use Wright's on my horns. Works great, not too overpowering, rinses off. Even if you don't have a bare horn, if you have tuning slide legs with years of dried-on slide cream, it'll cut through it nicely.
I've never had quite the gumption to try it on the insides of my outer slides, though: I've always used dry muslin or cheesecloth and left anything heavier for a chem clean. Will give it a try on a spare King 607 slide that's been temperamental ever since I got it.
I'll give the EagleOne Nanowax a try: I've tried Howard Feed and Wax before, but don't love the oil (even though it's orange oil).
I've never had quite the gumption to try it on the insides of my outer slides, though: I've always used dry muslin or cheesecloth and left anything heavier for a chem clean. Will give it a try on a spare King 607 slide that's been temperamental ever since I got it.
I'll give the EagleOne Nanowax a try: I've tried Howard Feed and Wax before, but don't love the oil (even though it's orange oil).
- DougHulme
- Posts: 497
- Joined: Fri Apr 27, 2018 12:54 am
- Location: Portsmouth UK
- Contact:
Re: Brass polish recommendation
Brasso in the UK is apparently (so I am told) less abrasive than the formula sold in the US, it also comes in rag form not liquid and is much easier to use than that which has been described as Brasso in the US. I also use Wrights - theres not much difference really but the fact that (UK) Brasso is already impregnated in a suitable polishing cloth means its slightly easier and cleaner to apply, so I tend to use Brasso for small jobs Wrights for bigger - with similar results. I use a car polish over here called 'MER' for the laquer, my guess is its similar to whats been mentioned here already by you US residents, Nanowax. This discussion also took place a few weeks ago in a different topic here somewhere... Doug
-
- Posts: 5
- Joined: Sat Apr 25, 2020 4:21 pm
Re: Brass polish recommendation
I did a paint correction project with my daughter on her car and this is spot on. The modern (Maguires, Mothers, etc.) buffing and polishing products are designed to remove imperfections in auto topcoats. The auto industry used to use lacquer, but they use something different these days, some sort of polyurethane. Back in the day, car hobbyists would lay down 15-16 coats of lacquer on their cars, then buff and polish it up to a super shine.
My Bach 50's bell has long since lost its lacquer and I use Wrights when it starts turning dull. Then I use the Maguires 205 buffing compound followed by the 105 polish. The buffing compound is not as aggressive as the Wrights and the horn looks factory fresh when I'm done. I do this all by hand. In the past I've done all this with the different buffing bars, red, green, and white with my hand drill and a polishing wheel. I don't do that anymore--too afraid of bumping the bell
The Wrights seems less aggressive than any of the buffing bars. But, I agree that if it's making the metal shiny, there's some abrasives at work,