1953 8H Custom in the house!
-
- Posts: 703
- Joined: Tue Jan 22, 2019 2:52 pm
- Location: Santa Fe, New Mexico USA
- Contact:
1953 8H Custom in the house!
I rarely post images of acquisitions that I don't intend to sell, but I recently won this 1953 8H Custom in an obscure online auction, and since the condition is truly amazing (all original and about as close to mint as one could imagine), I thought I'd share a few shots.
Another bidder was almost as determined as I was to purchase this horn, so I paid more than I would have liked, but I just decided to throw caution to the wind and go for it.
No regrets!
Another bidder was almost as determined as I was to purchase this horn, so I paid more than I would have liked, but I just decided to throw caution to the wind and go for it.
No regrets!
You do not have the required permissions to view the files attached to this post.
Last edited by biggiesmalls on Thu Sep 08, 2022 9:47 pm, edited 2 times in total.
-
- Posts: 703
- Joined: Tue Jan 22, 2019 2:52 pm
- Location: Santa Fe, New Mexico USA
- Contact:
Re: 1953 8H Custom in the house!
Engraving and case:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1378
- Joined: Wed Sep 05, 2018 10:18 pm
Re: 1953 8H Custom in the house!
Bloody fantastic. I'd certainly love to own it when you tire of this beauty.
6H (K series)
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
- TromboneSam
- Posts: 195
- Joined: Mon Jul 30, 2018 5:33 pm
- Location: NYC
- Contact:
Re: 1953 8H Custom in the house!
Do you mean 88H? Is the slide what says 8H?
Looks beautiful!
Looks beautiful!
-
- Posts: 703
- Joined: Tue Jan 22, 2019 2:52 pm
- Location: Santa Fe, New Mexico USA
- Contact:
Re: 1953 8H Custom in the house!
88H wasn't a designated Conn model until 1954, the year after this horn was produced. Before 1954, these horns were simply referred to as the 8H Custom model, since the F-attachment was only available as a custom order item added to an 8H. Like all 8H Customs, it's stamped "8H" on both the slide and the receiver.
-
- Posts: 4285
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: 1953 8H Custom in the house!
Chuck,
It looks so sweet!
How does it play?
Similar to top-end Elkhart 88Hs?
Remington shank?
It looks so sweet!

How does it play?
Similar to top-end Elkhart 88Hs?
Remington shank?
-
- Posts: 374
- Joined: Thu Dec 13, 2018 3:31 pm
Re: 1953 8H Custom in the house!
Very, very nice!
Really a good looking horn! I hope you'll get lots of fantastic playing on it.
Very, very nice!
Really a good looking horn! I hope you'll get lots of fantastic playing on it.
Very, very nice!
Welcome to visit my web store: https://www.danieleng.com/
Big Engband on Spotify: https://open.spotify.com/artist/30Vuft1 ... me3sZi8q-A
Big Engband on Spotify: https://open.spotify.com/artist/30Vuft1 ... me3sZi8q-A
- hyperbolica
- Posts: 3344
- Joined: Fri Mar 23, 2018 7:31 am
Re: 1953 8H Custom in the house!
Very nice.
-
- Posts: 1257
- Joined: Fri Mar 23, 2018 7:20 am
- Location: Boston, MA, USA
- Contact:
Re: 1953 8H Custom in the house!
Beautiful!
Gabe Rice
Stephens Brass Instruments Artist
Faculty
Boston University School of Music
Kinhaven Music School Senior Session
Bass Trombonist
Rhode Island Philharmonic Orchestra
Vermont Symphony Orchestra
Stephens Brass Instruments Artist
Faculty
Boston University School of Music
Kinhaven Music School Senior Session
Bass Trombonist
Rhode Island Philharmonic Orchestra
Vermont Symphony Orchestra
- elmsandr
- Posts: 1202
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
Re: 1953 8H Custom in the house!
I’ve always loved this age of these with the tuning slide bow guard.
If it plays half as good as it looks it will be fantastic.
Cheers,
Andy
If it plays half as good as it looks it will be fantastic.
Cheers,
Andy
-
- Posts: 703
- Joined: Tue Jan 22, 2019 2:52 pm
- Location: Santa Fe, New Mexico USA
- Contact:
Re: 1953 8H Custom in the house!
Many thanks to all who have posted comments and complements.
It was a bittersweet moment when I sold my MV42G last month, but it seems that whenever I sell one great horn that's not getting played like it should, another great horn comes my way in short order.
Well Dave, I've been looking for a nice clean 8H Custom or mid-'50's 88H for quite some time now. I've owned over a dozen 1960's 88H's in the last decade (lost count at some point), and while they've all had their charms (and quirks), none of them have had quite the overall magic of my '55 8H.
There's just something about the thin 8.5" red brass Conn bells from the early- to mid-'50's that makes them a joy to play. The attacks are instantaneous and the feedback is palpable, inspiring real confidence, especially during pianissimo playing. I often marvel at the whisper-soft dynamics I can confidently coax out of my '55 8H. When articulating fast passages, there's absolutely no lag between what I hear in my head and what comes out of the bell, encouraging me to attempt these passages at even faster tempi.
Obviously these thin bells can't handle the kind of extreme volume that the later, heavier Elkhart bells seem to take in stride, and maybe they don't blend quite as well in a section as the later Elkharts, but hey, that's why I own an E series 88H and a Minick 8H bell.
After spending a couple of hours spent playing this '53 8H Custom, I can confidently say that it plays very much like my '55 8H, with all the same attributes that inspire me to practice and make beautiful music.
Interestingly, this '53 has none of the sympathetic ringing on F# that I've found in varying degrees (ranging from mildly irritating to highly annoying) on practically all of the '60's 88H's I've owned. And unlike quite a few of my previous '60's 88H's, 10th partial on this horn locks in very nicely.
And yes, the heavily tarnished Remington mouthpiece that came with the horn fits perfectly in the receiver, as does my preferred mouthpiece,
a Schilke 51 long shank.
It was a bittersweet moment when I sold my MV42G last month, but it seems that whenever I sell one great horn that's not getting played like it should, another great horn comes my way in short order.
Well Dave, I've been looking for a nice clean 8H Custom or mid-'50's 88H for quite some time now. I've owned over a dozen 1960's 88H's in the last decade (lost count at some point), and while they've all had their charms (and quirks), none of them have had quite the overall magic of my '55 8H.
There's just something about the thin 8.5" red brass Conn bells from the early- to mid-'50's that makes them a joy to play. The attacks are instantaneous and the feedback is palpable, inspiring real confidence, especially during pianissimo playing. I often marvel at the whisper-soft dynamics I can confidently coax out of my '55 8H. When articulating fast passages, there's absolutely no lag between what I hear in my head and what comes out of the bell, encouraging me to attempt these passages at even faster tempi.
Obviously these thin bells can't handle the kind of extreme volume that the later, heavier Elkhart bells seem to take in stride, and maybe they don't blend quite as well in a section as the later Elkharts, but hey, that's why I own an E series 88H and a Minick 8H bell.
After spending a couple of hours spent playing this '53 8H Custom, I can confidently say that it plays very much like my '55 8H, with all the same attributes that inspire me to practice and make beautiful music.
Interestingly, this '53 has none of the sympathetic ringing on F# that I've found in varying degrees (ranging from mildly irritating to highly annoying) on practically all of the '60's 88H's I've owned. And unlike quite a few of my previous '60's 88H's, 10th partial on this horn locks in very nicely.
And yes, the heavily tarnished Remington mouthpiece that came with the horn fits perfectly in the receiver, as does my preferred mouthpiece,
a Schilke 51 long shank.
-
- Posts: 1378
- Joined: Wed Sep 05, 2018 10:18 pm
Re: 1953 8H Custom in the house!
[quote=biggiesmalls post_id=188397 time=1662776720
[/quote]
Obviously these thin bells can't handle the kind of extreme volume that the later, heavier Elkhart bells seem to take in stride, and maybe they don't blend quite as well in a section as the later Elkharts, but hey, that's why I own an E series 88H and a Minick 8H bell.
[/quote]
A big reason i sold my '58 8H was the thin bell being able to handle greater volumes. It played wonderfully as a solo horn but i have other horns that can fill that role.
[/quote]
Obviously these thin bells can't handle the kind of extreme volume that the later, heavier Elkhart bells seem to take in stride, and maybe they don't blend quite as well in a section as the later Elkharts, but hey, that's why I own an E series 88H and a Minick 8H bell.
[/quote]
A big reason i sold my '58 8H was the thin bell being able to handle greater volumes. It played wonderfully as a solo horn but i have other horns that can fill that role.
6H (K series)
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
-
- Posts: 459
- Joined: Thu Aug 16, 2018 12:59 pm
Re: 1953 8H Custom in the house!
I dont get the "Thin bell not being able to handle Great volume" thing... Thinner bells usually get heared through big sounds by having a nice edge with a lot of higher partials in the overtone pattern... While sometimes Bach can get an "ugly complexion" when pushed over a certain level, Elkhart Conns will keep on singing.. Besides, how loud do You need to go.? I have a 1920 " Symphony" version of the 8H..Granted, a little bigger in the bell taper but very thin and responsive bell.. I am very far from needing more power, Even playing extremly loud..
-
- Posts: 1378
- Joined: Wed Sep 05, 2018 10:18 pm
Re: 1953 8H Custom in the house!
Don't get me wrong, my '58 8H was easy to play and sang with the lighter bell. Overall i prefer to have a bit more resistance in my bell section when i play. My setup may have not lent well to keep the horn from getting uncharacteristically bright or edgy qhen playing in a section. And i Don't need a horn for smaller chamber groups since i have a 78H for those occurrences. If given the opportunity I'd love to have an early 8H/88H again.Tbarh wrote: ↑Sat Sep 10, 2022 1:00 am I dont get the "Thin bell not being able to handle Great volume" thing... Thinner bells usually get heared through big sounds by having a nice edge with a lot of higher partials in the overtone pattern... While sometimes Bach can get an "ugly complexion" when pushed over a certain level, Elkhart Conns will keep on singing.. Besides, how loud do You need to go.? I have a 1920 " Symphony" version of the 8H..Granted, a little bigger in the bell taper but very thin and responsive bell.. I am very far from needing more power, Even playing extremly loud..
6H (K series)
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
Elkhart 60s' 6H bell/5H slide
78H (K series)
8H (N series bell w/ modern slide)
88HN
71H (dependant valves)
72H bell section (half moon)
35H alto (K series)
Boneyard custom .509 tenor
-
- Posts: 1256
- Joined: Thu May 10, 2018 1:39 pm
Re: 1953 8H Custom in the house!
My 50's 8H was my orchestral horn for many years, and got a thumbs-up from all of my colleagues when I first brought it in to work. My 70's 88H was also a very good horn, but the 8H had a bigger core to the sound, and for me, the heavy slide with thicker cross braces on it made up for any extra thinness in the bell. Mine has a detachable open wrap F attachment, made by Chuck McAlexander, which played well too. I tend to prefer it in the straight horn setup, though - it just rings, and held up to loud playing.
Jim Scott
Jim Scott