Hey guys, managed to snag some old-school aircraft stripper and my auto parts store.
Stripped most of the lacquer off today, but need to do a little more. I want to polish the nickel and scratch the brass.. What should I use on the nickel?
Thanks in advance
EZ
Stripped Bach 50 A3
-
EZSlider
- Posts: 134
- Joined: Tue Apr 17, 2018 7:29 pm
- Location: Central NY
-
pfrancis
- Posts: 69
- Joined: Sun Jul 22, 2018 12:18 pm
Re: Stripped Bach 50 A3
If you are going to leave it raw brass I would just polish it all. Raw scratched finish will hold alllllll the oil/dirt it touches, also it won’t have the “brushed” lacquer look as it will not keep the brightness required.
If you are prepping for lacquer it’s another ball game, but leaving it raw brass - in my opinion - scratch finish is a waste of effort.
If you are prepping for lacquer it’s another ball game, but leaving it raw brass - in my opinion - scratch finish is a waste of effort.
-
hornbuilder
- Posts: 868
- Joined: Wed May 02, 2018 9:20 pm
Re: Stripped Bach 50 A3
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
-
nateaff
- Posts: 9
- Joined: Tue Jan 23, 2024 7:56 am
Re: Stripped Bach 50 A3
It takes a fair amount of elbow grease but Ive gotten my raw brass horns to a mirror finish using DiamondTechTools branded polishing paste. I go all the way up to 100,000 grit when I do it.
And I agree, you should just polish everything. Patina on the scratch brush will look dirty more than anything else
And I agree, you should just polish everything. Patina on the scratch brush will look dirty more than anything else