Page 1 of 1
Edwards vs Getzen custom
Posted: Sun Apr 26, 2020 5:05 pm
by bass
Whats the difference between these horns? Specifically their basses
Re: Edwards vs Getzen custom
Posted: Sun Apr 26, 2020 6:41 pm
by Kevbach33
The Getzen Custom Series is built with what the company calls the most popular specs from the Edwards basses. Edwards, as you can probably guess, can be truly customized with your choice of bell, valve section, tuning slide and hand slide. Even so, there are small differences:
1. The mountings for the bell are in different locations.
2. The Edwards has the edge bracing system, which frees up the bell from invasive bracing. The Getzen has the older style of bracing with tabs. (Only applies to large tenors and basses.)
3. The slide tenons are different. It's my understanding that Getzen slides can be used on Conn bell sections. Edwards states their slides can work on Bach bell sections.
Only the tuning slides and leadpipes are interchangeable between Edwards and the Getzen Custom Series.
I'm sure there are other differences, but these should help you get started.
Re: Edwards vs Getzen custom
Posted: Sun Apr 26, 2020 6:54 pm
by braymond21
Re: Edwards vs Getzen custom
Posted: Mon Apr 27, 2020 1:12 pm
by tbonesullivan
Just came into say that they are ALL great pro level horns. For many people. The Getzen Custom series horns, or even Custom Reserve, will work just fine.
However if you really want that extra level of fine tuning, getting fit at the Edwards shop for a horn would be another way to go.
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 11:46 am
by Crazy4Tbone86
Be careful with some of the Getzen “pro level” horns. Many of the parts that appear to be nickel-silver are merely brass that is plated with nickel. If a “nickel-silver” section needs repair or dent work, it only takes a few seconds on the buffing wheel for the brass to show through.
I don’t know if Getzen uses nickel-plated parts on their Custom Series bass trombones, but I have seen it a lot on their Eterna Series 1052 and 1062 horns. They use plating on braces, flanges and saddles for levers.
I’m sure there will be someone who says “but the Eterna 1052 and 1062 are not professional-grade instruments.” Let’s please remember that David Taylor played on a 1062 model and Getzen used his professional status to market that instrument for many years.
As far as I know, all of the nickel-silver parts on Edwards horns are solid nickel-silver. I have not seen any brass come through on any nickel Edwards parts that I have sanded or buffed.
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 6:29 pm
by tbonesullivan
Crazy4Tbone86 wrote: ↑Wed Apr 29, 2020 11:46 am
Be careful with some of the Getzen “pro level” horns. Many of the parts that appear to be nickel-silver are merely brass that is plated with nickel. If a “nickel-silver” section needs repair or dent work, it only takes a few seconds on the buffing wheel for the brass to show through.
That's somewhat odd. I would think the cost of plating the parts would negate any economy from using the different alloy.
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 8:12 pm
by elmsandr
tbonesullivan wrote: ↑Wed Apr 29, 2020 6:29 pm
Crazy4Tbone86 wrote: ↑Wed Apr 29, 2020 11:46 am
Be careful with some of the Getzen “pro level” horns. Many of the parts that appear to be nickel-silver are merely brass that is plated with nickel. If a “nickel-silver” section needs repair or dent work, it only takes a few seconds on the buffing wheel for the brass to show through.
That's somewhat odd. I would think the cost of plating the parts would negate any economy from using the different alloy.
They (or at least used to) do all the plating in house. Really isn’t an expensive process to add if you have the stuff to do it.
And even the Edwards parts used to be plated. Didn’t like that then, still don’t like it now. Brass for a handgrip is fine, just leave it brass. Same for a ferrule, who cares when the nickel view is really only cosmetic?
Cheers,
Andy
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 8:17 pm
by Matt K
I believe the 3508 horns have chrome plated handgrips too. Perhaps they do that for others and it makes sense for those horns to just make a bunch of cork barrels in brass and put the "appropriate" level of finish on them for that "level" of horn.
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 11:16 pm
by ZacharyThornton
I know we still do our own plating. I am currently furloughed because of the stay at home order in Wisconsin (along with everyone else), but I am fairly sure that older model Getzen Custom and Edwards horns had brass cork barrels with nickel plating. That is not how they are done anymore, they are a piece of nickel not just coated (I am fairly certain and can ask when we all get back to work).
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 11:17 pm
by ZacharyThornton
ZacharyThornton wrote: ↑Wed Apr 29, 2020 11:16 pm
I know we still do our own plating. I am currently furloughed because of the stay at home order in Wisconsin (along with everyone else), but I know that older model Getzen Custom and Edwards horns had brass cork barrels with nickel plating. That is not how they are done anymore, they are a piece of nickel not just coated (I am fairly certain and can ask when we all get back to work).
Re: Edwards vs Getzen custom
Posted: Wed Apr 29, 2020 11:26 pm
by GBP
ZacharyThornton wrote: ↑Wed Apr 29, 2020 11:17 pm
ZacharyThornton wrote: ↑Wed Apr 29, 2020 11:16 pm
I know we still do our own plating. I am currently furloughed because of the stay at home order in Wisconsin (along with everyone else), but I know that older model Getzen Custom and Edwards horns had brass cork barrels with nickel plating. That is not how they are done anymore, they are a piece of nickel not just coated (I am fairly certain and can ask when we all get back to work).
That is what I remember. I know my 2000 Getzen had plating. The slide I have bought in the last 5 years are all solid nickel and my 502 is solid nickel as well.
Re: Edwards vs Getzen custom
Posted: Thu Apr 30, 2020 1:56 pm
by tbonesullivan
Well. the nickel is a bit more resilient than brass, so the plating would help with corrosion. Also I think Earl Williams was big on the idea of trombones being made all from the same alloy. Not sure if it really matters.
Re: Edwards vs Getzen custom
Posted: Thu Apr 30, 2020 9:14 pm
by elmsandr
tbonesullivan wrote: ↑Thu Apr 30, 2020 1:56 pm
Well. the nickel is a bit more resilient than brass, so the plating would help with corrosion. Also I think Earl Williams was big on the idea of trombones being made all from the same alloy. Not sure if it really matters.
*a tiny bit. I have a trombone downstairs from 1925... the brass is fine.
I think they nickel plated because they could and those parts are nickel on Bachs and Conns. Kanstuls seem just fine with brass parts.
Cheers,
Andy
Re: Edwards vs Getzen custom
Posted: Thu Apr 30, 2020 9:42 pm
by pedrombon
I can understand that solid nickel may be necessary in contact areas due to its hardness (handgrip), but in ferrules and other parts I think it is not so essential.
Re: Edwards vs Getzen custom
Posted: Sat May 02, 2020 1:21 am
by GBP
All I really cared about is that the horn played well. If I was a Thayer type player, I would still own that Getzen.