Page 1 of 1
Proper Care for an unlacquered trombone bell
Posted: Tue Nov 07, 2023 12:22 pm
by Ch0ward
I apologize if this has been answered ad nauseam, but I recently purchased a corporation Bach 42 with an unlacquered bell. The previous owner had been letting the bell patina, but the long-time owner before that had chosen to clean the bell regularly, to keep it relatively free of patina. If I wanted to keep the bell in a clean raw brass state without oxidization what would be the best course of action?
Re: Proper Care for an unlacquered trombone bell
Posted: Tue Nov 07, 2023 12:59 pm
by Burgerbob
Polish it every couple months.
Re: Proper Care for an unlacquered trombone bell
Posted: Tue Nov 07, 2023 1:29 pm
by JLivi
I find that Flitz is a great polish for unlacquered bells.
I like the patina look so I never polish my bell. But when I get my horn cleaned they polish it up. That's enough for me.
Re: Proper Care for an unlacquered trombone bell
Posted: Tue Nov 07, 2023 1:55 pm
by BGuttman
A friend of mine had an unlacquered tuba and polished it up with Nevr-Dull wadding. The thing stayed nice and bright for a year.
I had an unlacquered tuba that had the treatment that they used in the old days (called Chromating; it's not done any more due to health and pollution issues) and it stays a matte brass color forever.
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 8:50 am
by Kbiggs
JLivi wrote: ↑Tue Nov 07, 2023 1:29 pm
I find that Flitz is a great polish for unlacquered bells.
I like the patina look so I never polish my bell. But when I get my horn cleaned they polish it up. That's enough for me.
I used Flitz for a little while many years ago, until a repair tech told me it contains abrasives. I stopped using it, and started letting my bells develop patina.* I wouldn’t use Flitz on the slides, valves, or tubing regardless of whether it contains abrasive.
*Sounds like a disease when you put that way: “My repair tech just told me my horn has patina!! What do I do?!?”
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 9:15 am
by CharlieB
Once you get the horn to the "clean raw brass state without oxidation", you might think about some rattle can lacquer on just the hand and neck contact points, (unless you don't mind stained hands and shirt collars).
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 10:46 am
by harrisonreed
Just polish it and then buff with museum wax. "Clean raw brass state without oxidation" would only occur in space.
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 11:44 am
by cb56
What about partial laquer?
My 94 year old horn has patches of
laquer loss. The back side of the bell looks like it has freckles.
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 11:59 am
by GabrielRice
cb56 wrote: ↑Wed Nov 08, 2023 11:44 am
What about partial laquer?
My 94 year old horn has patches of
laquer loss. The back side of the bell looks like it has freckles.
If you try to polish it the rest of the lacquer will almost certainly come off.
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 1:59 pm
by cb56
I used some wright's silver polish on it and it didn't seem to do much at all.
Probably should just leave it be
Re: Proper Care for an unlacquered trombone bell
Posted: Wed Nov 08, 2023 6:08 pm
by Ozzlefinch
I clean mine with white vinegar to remove the browning and then coat the brass with a homemade polish/sealer of beeswax, turpentine and linseed oil. It keeps it nice and patina free for months at a time. It's a very old school recipe.
Re: Proper Care for an unlacquered trombone bell
Posted: Mon Nov 20, 2023 7:30 pm
by Blabberbucket
Ch0ward wrote: ↑Tue Nov 07, 2023 12:22 pm
I apologize if this has been answered ad nauseam, but I recently purchased a corporation Bach 42 with an unlacquered bell. The previous owner had been letting the bell patina, but the long-time owner before that had chosen to clean the bell regularly, to keep it relatively free of patina. If I wanted to keep the bell in a clean raw brass state without oxidization what would be the best course of action?
Have it buffed and lacquered.