Rotary Linkage on Yamaha 421G
-
- Posts: 460
- Joined: Wed Jul 11, 2018 1:51 pm
- Location: New Albany, Ohio
Rotary Linkage on Yamaha 421G
I have a Yamaha 421G and I just love the sound and response. My only problem is the linkage with the rotor. The linkage runs on the inside of my left thumb (between my thumb and the neckpipe) and I just can't seem to find a good place to keep from hitting my left thumb against it when I play without bending my wrist away from the valve.
Looking for suggestions to help with this. I'm thinking of going to a good tech near me and see if he can move the linkage further toward the bell so there would be nothing between my thumb and the valve. Currently I use a Neotech grip and have tried changing the adjustment of the brace without any major improvement.
Open to suggestions.
Thanks in advance!
Looking for suggestions to help with this. I'm thinking of going to a good tech near me and see if he can move the linkage further toward the bell so there would be nothing between my thumb and the valve. Currently I use a Neotech grip and have tried changing the adjustment of the brace without any major improvement.
Open to suggestions.
Thanks in advance!
Dave
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
- Matt K
- Verified
- Posts: 4240
- Joined: Tue Mar 20, 2018 10:34 pm
- Contact:
Re: Rotary Linkage on Yamaha 421G
So, the only caveat to this is that Yamaha parts can sometimes be very time consuming to get... but I love the Yamaha linkages on their pro horns. I just had a YBL830 installed on my Shires frankenhorn and love them. It took me like 2 years but I also had a bit of a series of unfortunate events that made it take much longer than it would have otherwise, including covid. It's probably way, way faster.
Since its just a single trigger, you might be able to have a tech switch it from the string linkage to one from say a YSL548. I have that horn too and the linkage looks identical other than the 800 series linkages have an extra little nickel paddle that attaches to the rod.
Since its just a single trigger, you might be able to have a tech switch it from the string linkage to one from say a YSL548. I have that horn too and the linkage looks identical other than the 800 series linkages have an extra little nickel paddle that attaches to the rod.
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: Rotary Linkage on Yamaha 421G
Switching from an “under the thumb” lever to an “over the thumb” lever is a rather common modification. I do several of them every year and usually use Bach triggers, which I always keep a few in stock. The Yamahas can be a bit of a hassle to remove because the lever is sometimes brazed on (instead of soft soldered). Still, the modification is very doable.
If you want to replace it with a Yamaha lever, the biggest hassle might be getting the parts. Some Yamaha parts arrive in a few days. Other Yamaha parts might take months. Currently, I am waiting on some Yamaha parts that I ordered two months ago.
If you want to replace it with a Yamaha lever, the biggest hassle might be getting the parts. Some Yamaha parts arrive in a few days. Other Yamaha parts might take months. Currently, I am waiting on some Yamaha parts that I ordered two months ago.
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Rotary Linkage on Yamaha 421G
You could do this with zero new parts - move the saddle further up the bell brace, then just flip the existing lever. You'd need to re-braze the pivot arm/tab onto the opposite side of the main cylindrical lever element, then reverse the direction of the string linkage half of the lever by making a single clean cut and brazing it back together flipped 180 deg.
There's no particular point in this if you've got a suitable new part on the shelf, but it's not much trouble.
- ArbanRubank
- Posts: 424
- Joined: Sat Feb 23, 2019 7:50 am
- Location: Pittsburgh, PA
Re: Rotary Linkage on Yamaha 421G
I had the very same problem. When I started using a Neotech trombone grip, that particular problem went away! If you prefer not to have to use it though, perhaps one of the other solutions presented will work for you.
OBTW, I also love my Yamaha 421G. I think it has a terrific sound and is extremely versatile.
OBTW, I also love my Yamaha 421G. I think it has a terrific sound and is extremely versatile.
- ArbanRubank
- Posts: 424
- Joined: Sat Feb 23, 2019 7:50 am
- Location: Pittsburgh, PA
Re: Rotary Linkage on Yamaha 421G
I just remembered that I installed an Etsy trigger guard similar to what is pictured in the link listed below and it largely but not completely mitigated the problem.
https://www.etsy.com/listing/705985100/ ... rs=1&cns=1
When I also subsequently installed the Neotech trombone grip, the situation was then resolved nearly 100 percent.
Best of luck.
https://www.etsy.com/listing/705985100/ ... rs=1&cns=1
When I also subsequently installed the Neotech trombone grip, the situation was then resolved nearly 100 percent.
Best of luck.
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: Rotary Linkage on Yamaha 421G
I’m not quite following the logic of “moving the saddle further up the brace and flipping the existing lever.” The YBL-421 saddles are intended to be half on the slide receiver and half on the brace. I don’t know if they can be cut to be only on the brace. If you flip the lever around, the thumb part would be located over rotor cap and the string rod would be projecting forward toward the handslide.
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Rotary Linkage on Yamaha 421G
Yes, hence the second sentence - you'd need to re-braze the pivot arm/tab onto the opposite side of the main cylindrical lever element, then reverse the direction of the string linkage half of the lever by making a single clean cut and brazing it back together flipped 180 deg. Here's a terrible drawing.Crazy4Tbone86 wrote: ↑Sun Aug 22, 2021 2:50 pm I’m not quite following the logic ... If you flip the lever around, the thumb part would be located over rotor cap and the string rod would be projecting forward toward the handslide.
Again, unnecessary if there's something else generic and suitable to hand but, if there isn't, not a big deal.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 460
- Joined: Wed Jul 11, 2018 1:51 pm
- Location: New Albany, Ohio
Re: Rotary Linkage on Yamaha 421G
Thanks for your responses. Soon as I get back in town it's going to my tech.
Dave
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
-
- Posts: 1015
- Joined: Wed May 02, 2018 9:20 pm
Re: Rotary Linkage on Yamaha 421G
Yamaha lever bridges are silver soldered on. FYI.
You're also reversing the direction of the valve rotation, which will.make slurring into and out of the valve notes much noisier in the transition.
You're also reversing the direction of the valve rotation, which will.make slurring into and out of the valve notes much noisier in the transition.
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: Rotary Linkage on Yamaha 421G
Matthew……I have worked on a couple of Yamaha bass trombones in which the lever was brazed on. Might have been a thing they did for only a short time……possibly 1980’s or 1990’s? But they are out there.
Ithinknot……missed the part about flipping the pivot arm. Now it makes sense. Actually, your drawing explained it well!
Ithinknot……missed the part about flipping the pivot arm. Now it makes sense. Actually, your drawing explained it well!
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: Rotary Linkage on Yamaha 421G
That's an interesting discussion that I have not see on this forum....maybe I just missed it. I believe that the direction that a rotary valves rotates makes a big difference in how a horn plays. I have talked with some players who think that it's all in my head. Back some years, Yamaha intentionally changed the design of some their models so that the rotors would rotate up towards the first port. I'm guessing that their research determined there was a positive difference.hornbuilder wrote: ↑Sun Aug 22, 2021 6:45 pm You're also reversing the direction of the valve rotation, which will.make slurring into and out of the valve notes much noisier in the transition.
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
-
- Posts: 1015
- Joined: Wed May 02, 2018 9:20 pm
Re: Rotary Linkage on Yamaha 421G
It isn't in your head. It is the difference between the rotor simply re-directing the sound upwards into the valve, or, the rotor cutting off the sound path when the ports are transitioning.
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Rotary Linkage on Yamaha 421G
Yes! And another reason not to discard string linkages just for the sake of it, without modifying stop arms/bumper plates to retain the correct rotation (I prefer strings anyway, but that's a separate discussion that we needn't revisit).Crazy4Tbone86 wrote: ↑Mon Aug 23, 2021 6:24 amThat's an interesting discussion that I have not see on this forum....maybe I just missed it. I believe that the direction that a rotary valves rotates makes a big difference in how a horn plays. I have talked with some players who think that it's all in my head. Back some years, Yamaha intentionally changed the design of some their models so that the rotors would rotate up towards the first port. I'm guessing that their research determined there was a positive difference.hornbuilder wrote: ↑Sun Aug 22, 2021 6:45 pm You're also reversing the direction of the valve rotation, which will.make slurring into and out of the valve notes much noisier in the transition.
I've always wondered why some makers chose not to care about this. Kanstul second valves, for example. Or the Duo Gravis, where both are 'wrong' (I'm guessing because it keeps the dual trigger linkage arrangement compact/tidy looking?). Neither direction has some great advantage with water dumping, but there's definitely a difference in the kind of turbulence and resulting sound blips.
Rotary tubas do the same thing, with the traditional arrangement having 1+2 'correct' and 3+4 'wrong'. Keeps the linkages symmetrical, I guess. I've read people argue that it makes no difference because either way you're 'chopping up the sound wave' (colloquially speaking, of course) if not on the opening movement, then on the closing, but this obviously ignores the fact that there is positive air flow/pressure in one particular direction and not the other. (And it pretty obviously doesn't feel or sound the same.) Relatively recently, Miraphone changed all their models to rotate in the same direction, so clearly they agree...
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: Rotary Linkage on Yamaha 421G
Exactly! If the rotation is correct, the air is never completely cut off in either direction. No pop....especially if there is some type of venting.
Funny that ithinknot mentions the rotary mechanism arrangement in tubas. When out gigging, I have seen a couple of tuba players who had their rotary valve mechanisms customized to make them all rotate the "proper" direction. The lever arm arrangement looks a little strange because it had to be shifted down on a couple of valves. But if it makes the horns play better.....go for it!
Funny that ithinknot mentions the rotary mechanism arrangement in tubas. When out gigging, I have seen a couple of tuba players who had their rotary valve mechanisms customized to make them all rotate the "proper" direction. The lever arm arrangement looks a little strange because it had to be shifted down on a couple of valves. But if it makes the horns play better.....go for it!
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
-
- Posts: 460
- Joined: Wed Jul 11, 2018 1:51 pm
- Location: New Albany, Ohio
Re: Rotary Linkage on Yamaha 421G
Got it back from the shop. Really makes the horn work better for me. It's so much better I was able to take the Neotech grip off it and free up either hand for mute swaps.
As some suspected, the original Yamaha pivot was brazed onto the crossbar. Not only that, a slot had been milled into the crossbar and the pivot bracket had a detent that fit into it. My tech filled in the slot and removed the detent. Most of the work was cosmetic restoration.
As some suspected, the original Yamaha pivot was brazed onto the crossbar. Not only that, a slot had been milled into the crossbar and the pivot bracket had a detent that fit into it. My tech filled in the slot and removed the detent. Most of the work was cosmetic restoration.
You do not have the required permissions to view the files attached to this post.
Dave
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
- Matt K
- Verified
- Posts: 4240
- Joined: Tue Mar 20, 2018 10:34 pm
- Contact:
Re: Rotary Linkage on Yamaha 421G
That's sweet. The one thing I don't like about the <800 Yamaha series is the linkage. I mean, I like string linkages generally, but I prefer what you have pictured where the bar is on the side & the paddle is wonderful. I typically put woodwind cork on mine. VERY comfortable! FWIW, I was about to say you can also order the 800 series linkages, I've done so myself, but it took FOREVER to get the part from Yamaha. It's totally worth it, I absolutely love the linkages, but I don't think I'd do it again based on how long it took to get the parts. And there were many, many, many parts. More than you'd think for a linkage!
-
- Posts: 491
- Joined: Sat Apr 21, 2018 3:08 pm
- Location: Silver Spring, MD
Re: Rotary Linkage on Yamaha 421G
+1 for the Yamaha levers, linkages, and rotors.