Anyone have a file to 3d print a cork barrel tool?
-
- Posts: 38
- Joined: Tue Dec 20, 2022 7:30 am
Anyone have a file to 3d print a cork barrel tool?
Maybe it'd be easier to just get some pipe and cut it out, but it seems like the tools you'd need to remove and replace cork barrel stuff would work if they were 3d printed.
Anyone try this yet or should I come up with something on my own?
The bumper removers like these ones:
https://www.ferreestoolsinc.com/product ... eq=uniform
The spacers would be easy to print something that'd work well too, I think:
https://www.ferreestoolsinc.com/product ... eq=uniform
Anyone try this yet or should I come up with something on my own?
The bumper removers like these ones:
https://www.ferreestoolsinc.com/product ... eq=uniform
The spacers would be easy to print something that'd work well too, I think:
https://www.ferreestoolsinc.com/product ... eq=uniform
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
-
- Posts: 38
- Joined: Tue Dec 20, 2022 7:30 am
Re: Anyone have a file to 3d print a cork barrel tool?
Hey now... the 3d printer might just require me spend a couple of hours on a computer creating the file and then sending it to the printer and then printing it a couple of times until I got it just right - but getting actual pipe might require leaving my house, driving to a store, and then spending 5 minutes cutting it
(or... I could just pay $60 for a pair of them and still not need to leave my house... hmm....)
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
-
- Posts: 1053
- Joined: Fri Mar 23, 2018 11:33 pm
Re: Anyone have a file to 3d print a cork barrel tool?
The Ferree's is way too pretty. Find a small piece of typical 1/2" copper pipe and cut a burr into the end and curl it up. Mine works great. Then find a girl's "pony" and use that as bumper material. Then you'll never need your tool again.
- elmsandr
- Posts: 1075
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
When's the last time you paid for delivery of a little piece of anything from McMaster-Carr?
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
This may be seeming like a real "first-world" problem. But given the current price of copper, maybe the printing approach is actually economical. When are places like Staples going to have 3-D printers beside all their other stuff so you can just walk in with a file and walk out with with a printed product?
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
- elmsandr
- Posts: 1075
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
Re: Anyone have a file to 3d print a cork barrel tool?
Probably when 3D printing works like that. Lots of “Spaghetti “ and tweaks seem to be the norm with printers now.
Heck, a tool like this will take a couple of hours on most printers.
Cheers,
Andy
Heck, a tool like this will take a couple of hours on most printers.
Cheers,
Andy
-
- Posts: 337
- Joined: Thu Oct 19, 2023 8:01 pm
- Location: USA
Re: Anyone have a file to 3d print a cork barrel tool?
Um... 2014?
https://www.businesswire.com/news/home/ ... and-Online
Many of my local libraries also have 3d printers for public use.
But of course Andy is right...it still takes hours.
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Anyone have a file to 3d print a cork barrel tool?
To actually help... if you want to make your own, just get some hobby shop K&S brass tube. 21/32" OD is perfect for bass/large tenor, and works on the majority of smaller stuff too; 19/32" if you want a dedicated small bore tool.
- harrisonreed
- Posts: 5165
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: Anyone have a file to 3d print a cork barrel tool?
What are you gonna 3D print that thin tool with - ABS? I'm no master of 3D printing but for the tool to work and not break, it has to be pretty darn thin, and sturdy, especially on the business end.
I think the thinnest you can go is something around .4mm -- you're telling me that a .4mm thick little bent hook of plastic isn't going to break off in the cork barrel? That is, if that is thin enough to begin with.
I think the thinnest you can go is something around .4mm -- you're telling me that a .4mm thick little bent hook of plastic isn't going to break off in the cork barrel? That is, if that is thin enough to begin with.
-
- Posts: 38
- Joined: Tue Dec 20, 2022 7:30 am
Re: Anyone have a file to 3d print a cork barrel tool?
Oh that's helpful - thanks. The ace hardware by me can ship-to-store a foot-long section of those for around $5 each.
-
- Posts: 38
- Joined: Tue Dec 20, 2022 7:30 am
Re: Anyone have a file to 3d print a cork barrel tool?
If I'm going to cut replacement cork from a sheet like this video (which seems easier than trying to keep a stock of different sized cork rings for different diameter slides)
What thickness of cork should I get?
What thickness of cork should I get?
- ithinknot
- Posts: 1107
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Anyone have a file to 3d print a cork barrel tool?
1/8" or 3mm usually does it. If necessary, you have quite a bit of leeway for compressing it in the rolling stage
-
- Posts: 1089
- Joined: Fri Dec 14, 2018 12:07 pm
- Contact:
Re: Anyone have a file to 3d print a cork barrel tool?
This.
You definitely don't need (or want) pipe.
Brad Close Brass Instruments - brassmedic.com
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
I think that reference is just to their selling of 3-D printers, so far as I can see. Their current list of "3D printing services" includes only two stores in NC -- both near Charlotte.
The local libraries here are lucky to have books -- which probably no one reads any longer.AtomicClock wrote: Many of my local libraries also have 3d printers for public use.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
Last time I looked, cork rings for trombone slides seemed easy enough to get on the web from, say J. L. Smith? But why not just use an O-ring, or cut your own felt ring bumper?
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
Also, you don't need the official cork tool. You can go to Harbor Freight and plunk down $5 for a set of 6 different "hook & pick" tools (basically dental picks, so you can also do your own tooth cleaning and dentistry). Very versatile for work on brass instruments as well.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 38
- Joined: Tue Dec 20, 2022 7:30 am
Re: Anyone have a file to 3d print a cork barrel tool?
Hmm, I didn't think about that. I actually already have a good plastic and brass pick and hook set that I use to work on scuba gear (remove o rings etc)ghmerrill wrote: ↑Wed Jan 24, 2024 3:39 pm Also, you don't need the official cork tool. You can go to Harbor Freight and plunk down $5 for a set of 6 different "hook & pick" tools (basically dental picks, so you can also do your own tooth cleaning and dentistry). Very versatile for work on brass instruments as well.
I'll try to make one of those tools anyway though because I already ordered the brass tubing to do it.
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
You can never have enough brass tubing.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 1089
- Joined: Fri Dec 14, 2018 12:07 pm
- Contact:
Re: Anyone have a file to 3d print a cork barrel tool?
Why not get trumpet felts? Very commonly used. If you don't want to bother with Allied or Ferree's, you can get them all over eBay, etc. Cork tends to break pretty quickly and you end up with a mess of cork pieces inside the cork barrel. The felts will stretch to fit over larger slide tubes. You don't need multiple sizes.
You do not have the required permissions to view the files attached to this post.
Brad Close Brass Instruments - brassmedic.com
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Anyone have a file to 3d print a cork barrel tool?
Why not get trombone slide bumper felts?
https://www.hickeys.com/search/products/sku077497.php
Sometimes in maintaining/repairing brass instruments we focus on getting "the correct replacement part". But with experience you learn that there are often perfectly acceptable alternatives -- and sometimes the alternative are actually better than the originals. Anyhow ... alternatives are available.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 1089
- Joined: Fri Dec 14, 2018 12:07 pm
- Contact:
Re: Anyone have a file to 3d print a cork barrel tool?
LOL, those are just Ferrees valve washers re-branded as "slide bumper felts". https://www.ferreestoolsinc.com/product ... 6041&_ss=r
But yes those would be fine for the purpose, and would save you having to figure out what size to order.
Brad Close Brass Instruments - brassmedic.com