Leadpipe Replacement King Tempo

[atopper333]

Another topic sparked this question for me. I have an old King Tempo with the nickel (Plated?) Bell. When looking down the inners, it’s mostly in great shape, but the leadpipe looks to be rather pitted.

I posted this in an effort to not hijack another post regarding the brassark 2B pipe…

Would that particular part be compatible with the original Tempo slide? If I remember correctly, the Tempo and 2B slides are interchangeable, but I don’t know if the leadpipe for the original Tempo would be interchangeable or accept a 2b style leadpipe, which would be nice as the 2B seems much more supported for obvious reasons.

[Blabberbucket]

The slide tenon may be the same, but the tubes have different bore sizes, the 2B being about .020" smaller than the Tempo bore on the mouthpiece side. A 2B pipe would likely be usable, just may require some adjustment to fit the larger bore of the Tempo.

[Matt K]

The tempo is 500 bore right? The 2B+ pipe would fit in that case. Or the Brassark 32H. Fwiw I also suspect a YSL354 pipe might work well, that’s a great design pipe and the 354 has some resemblance to the 354 on paper at least.

[JohnL]

It's a 1960's Tempo, right? Pretty sure that'd be a 1305; .491" bore. Maybe a Jiggs 2B leadpipe?

[Matt K]

If it’s 491 then Brad should be able to make one - someone in the thread you were thinking of hijackikg reported it was a massive improvement on a Jiggs pipe! You can also have a tech expand a 485 pipe usually. A shires #2 is also a safe bet

[atopper333]

Should be the 1305. I really appreciate the help on this one, I’ll definitely be looking into that Jiggs pipe!