Considering a getting a new Bass Mouthpiece

Post Reply
Lowbrassbrian
Posts: 36
Joined: Sat Aug 07, 2021 7:52 pm

Considering a getting a new Bass Mouthpiece

Post by Lowbrassbrian »

Hello all,

As the subject line states I am considering getting a new mouthpiece for my bass trombone. My current set up is a Shires George Curran model, with a Shires B3 leadpipe, as for my mouthpiece I had played on a Greg Black 1g regular weight with a .312 bore from July 2023 till January 2024. Since then I have been using my old Griego GP6 that I was on prior to the GB. I really love both mouthpieces for different reasons. The GB has such a rich, well blended sound with lots of core and is "darker" in sound which is my preference, I just don't think it's super responsive and I just can't get as crisp of articulations on it as I would like. On the other hand I love my GP6 for its very quick and easy articulations and I also just love the blow of the mouthpiece, I just don't the sound of it as much as I like my GB's.

Now the issues I have with both mouthpieces are obviously things I can work on and improve for myself, I just think possibly trying other mouthpieces could be helpful in that process. I have tried the George Curran Ultimate Brass Orchestral model mouthpiece and for me I just didn't think it has a great sound when I play on it and I also think its articulation isn't as crisp as the GP6's. I also have tried the Griego Hecht Orchestra 0, absolutely loved everything about it from the articulation, to response, to sound, I just don't think I can play on a rim diameter that wide. I also am not willing to get a custom from Griego to get the Hecht Orchestra in my preferred rim diameter of around 29mm or 1.14 inches as I have heard many stories of people getting customs and them just not working out as they had hoped.

So I am open to looking into any suggestions you people may have! The Griego Markey line seems tempting, but I have also heard many great things about Long Island Brass Company's mouthpieces and Doug Elliot mouthpieces. I also got a suggestion from a friend about trying a Greg Black 1g in the original bore size or different weights and any combinations in between. Again I am open to hearing everyone's thoughts.

I should also say that I am a college student right now who lives in central VA and doesn't have access to many places to try mouthpieces, so in order to try a mouthpiece I would likely have to buy it used then try it and if it doesn't work I would resell.

Thank you for reading this long thread and sorry for any grammar issues I may have made as I am a non-native English speaker.

Best,
Brian!
User avatar
Burgerbob
Posts: 5466
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Considering a getting a new Bass Mouthpiece

Post by Burgerbob »

Markey 90. Done!

It may also be worth trying the 2 leadpipe.
Aidan Ritchie, LA area player and teacher
User avatar
harrisonreed
Posts: 5569
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Considering a getting a new Bass Mouthpiece

Post by harrisonreed »

Are you mostly playing in a small practice room or classroom?

It's easy to condemn a mouthpiece for having bad response when the mouthpiece was designed for a large hall. Make sure you are playing in as many spaces as you can. I wouldn't make any determination about how a mouthpiece responds or sounds outside of a recital hall at a minimum.

It might not be your case at all, but it a shame when students achieve the ultimate setup for the 6x6 practice cube that doesn't work anywhere else.
LIBrassCo
Posts: 517
Joined: Sun Feb 24, 2019 5:34 am
Location: Long Island, NY
Contact:

Re: Considering a getting a new Bass Mouthpiece

Post by LIBrassCo »

I have a new line Pollard series of bass pieces about to be released, there's a few options you may find interesting.
Check out our new Pollard Sarastro line of mouthpieces: https://www.librassco.com/pollard-signature-series
Lowbrassbrian
Posts: 36
Joined: Sat Aug 07, 2021 7:52 pm

Re: Considering a getting a new Bass Mouthpiece

Post by Lowbrassbrian »

harrisonreed wrote: Fri Feb 09, 2024 10:54 am Are you mostly playing in a small practice room or classroom?

It's easy to condemn a mouthpiece for having bad response when the mouthpiece was designed for a large hall. Make sure you are playing in as many spaces as you can. I wouldn't make any determination about how a mouthpiece responds or sounds outside of a recital hall at a minimum.

It might not be your case at all, but it a shame when students achieve the ultimate setup for the 6x6 practice cube that doesn't work anywhere else.
I try and practice in various types of spaces and still find that I just can't get a good response from the Greg Black.
Elow
Posts: 1897
Joined: Mon Mar 02, 2020 6:18 am

Re: Considering a getting a new Bass Mouthpiece

Post by Elow »

The Doug Elliott is the best mouthpiece I’ve tried. The sound isn’t influenced in any direction, like most pieces. As a shorter guy I really need that efficiency that I get with the Doug Elliott. The lexan rim is amazing, so comfortable. I never worry about my mouthpiece anymore.
GabrielRice
Posts: 1255
Joined: Fri Mar 23, 2018 7:20 am
Location: Boston, MA, USA
Contact:

Re: Considering a getting a new Bass Mouthpiece

Post by GabrielRice »

I've been down this road. I'm now on a Doug Elliott XB 114 M/M8. I experimented with the L/L10 for a while, but I'm back on the M/M8.

I second the recommendation to give the B2 pipe an extended try. Everything will be easier - except maybe the extreme low register for a little while.
Gabe Rice
Stephens Brass Instruments Artist

Faculty
Boston University School of Music
Kinhaven Music School Senior Session

Bass Trombonist
Rhode Island Philharmonic Orchestra
Vermont Symphony Orchestra
User avatar
Doug Elliott
Posts: 3632
Joined: Wed Mar 21, 2018 10:12 pm
Location: Maryand

Re: Considering a getting a new Bass Mouthpiece

Post by Doug Elliott »

Where in "central Virginia" are you? I may be able to meet you and let you try some of my mouthpueces. I'll be driving.through there in a few days.
"I know a thing or two because I've seen a thing or two."
Pezza
Posts: 179
Joined: Tue Aug 24, 2021 6:30 am
Location: Melbourne, Australia

Re: Considering a getting a new Bass Mouthpiece

Post by Pezza »

There are a few bass bone pieces for sale in the classifieds section.
Schilke 59, Giddings Chinook are both good. I've had 1 of each over the years.
I now use a wedge 1 1/2.
Am I a trombone player who plays euphonium, or a euphonium player who plays trombone? :idk:
User avatar
Doug Elliott
Posts: 3632
Joined: Wed Mar 21, 2018 10:12 pm
Location: Maryand

Re: Considering a getting a new Bass Mouthpiece

Post by Doug Elliott »

Tomorrow (Monday 2/12) I will be driving up I-81.
If you, or hyperbolica, or anybody else in that area wants me to stop by, let me know.
"I know a thing or two because I've seen a thing or two."
TomInME
Posts: 205
Joined: Wed Jan 03, 2024 8:44 pm

Re: Considering a getting a new Bass Mouthpiece

Post by TomInME »

GabrielRice wrote: Fri Feb 09, 2024 7:42 pm I've been down this road. I'm now on a Doug Elliott XB 114 M/M8. I experimented with the L/L10 for a while, but I'm back on the M/M8.
Can you share your thoughts on the differences? I'm likely to be trying the L/L10 combo, but I'm coming from a setup that was smaller cup / bigger throat&backbore.
90's Bach 50B3LOG with 3d-printed valve cores
Shires lightweight slide (yellow, nickel crook) with B2N leadpipe
DE XB113mW / L* / L8
GabrielRice
Posts: 1255
Joined: Fri Mar 23, 2018 7:20 am
Location: Boston, MA, USA
Contact:

Re: Considering a getting a new Bass Mouthpiece

Post by GabrielRice »

TomInME wrote: Sun Feb 11, 2024 2:51 pm
GabrielRice wrote: Fri Feb 09, 2024 7:42 pm I've been down this road. I'm now on a Doug Elliott XB 114 M/M8. I experimented with the L/L10 for a while, but I'm back on the M/M8.
Can you share your thoughts on the differences? I'm likely to be trying the L/L10 combo, but I'm coming from a setup that was smaller cup / bigger throat&backbore.
I don't usually say this ;-) but it's hard to put into words. The #10 on both L and M seem to sound a bit wider and darker than the 8. I played the M/M8 combination for a long time and ultimately feel more comfortable on it.
Gabe Rice
Stephens Brass Instruments Artist

Faculty
Boston University School of Music
Kinhaven Music School Senior Session

Bass Trombonist
Rhode Island Philharmonic Orchestra
Vermont Symphony Orchestra
TomInME
Posts: 205
Joined: Wed Jan 03, 2024 8:44 pm

Re: Considering a getting a new Bass Mouthpiece

Post by TomInME »

GabrielRice wrote: Mon Feb 12, 2024 7:17 am I don't usually say this ;-) but it's hard to put into words.
I played the M/M8 combination for a long time and ultimately feel more comfortable on it.
Thanks for the explanation - "feel" is arguably the most important characteristic, and the most individual.
90's Bach 50B3LOG with 3d-printed valve cores
Shires lightweight slide (yellow, nickel crook) with B2N leadpipe
DE XB113mW / L* / L8
WGWTR180
Posts: 1642
Joined: Wed Sep 04, 2019 2:32 pm

Re: Considering a getting a new Bass Mouthpiece

Post by WGWTR180 »

Lowbrassbrian wrote: Fri Feb 09, 2024 1:07 pm
harrisonreed wrote: Fri Feb 09, 2024 10:54 am Are you mostly playing in a small practice room or classroom?

It's easy to condemn a mouthpiece for having bad response when the mouthpiece was designed for a large hall. Make sure you are playing in as many spaces as you can. I wouldn't make any determination about how a mouthpiece responds or sounds outside of a recital hall at a minimum.

It might not be your case at all, but it a shame when students achieve the ultimate setup for the 6x6 practice cube that doesn't work anywhere else.
I try and practice in various types of spaces and still find that I just can't get a good response from the Greg Black.
Then if the Black doesn't work at all sell it. Move on. To what?? Who knows but I'd give Doug's pieces a try. Meet up with him. Also as others have mentioned try the #2 pipe first. Might solve some issues.
KingThings
Posts: 36
Joined: Tue Feb 13, 2024 8:48 pm
Location: Canada/Italy

Re: Considering a getting a new Bass Mouthpiece

Post by KingThings »

I use a King 29 (large shank) for my beloved 1480 King, but the lead pipe on those is rather unique, so I am not sure it would be an ideal choice for other trombones. However, it is a really nice mouthpiece, and I find it allows me to access low and high extremes with no problem. The 1480 is kind of a small bass by today's standards.
Post Reply

Return to “Mouthpieces”