Studio Clean Out - Horns - Parts - Mutes

Post Reply
ttf_sterb225
Posts: 0
Joined: Sat Mar 31, 2018 11:53 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_sterb225 »

Cleaning out the studio.  All prices plus actual shipping charges.  PayPal and confirmed shipping address only please.  All items on Long Island if you are local and want to pick up or play test.  Email me northforkav at optonline dot net if you have questions.  Thanks for looking.

Bach Corporation 36/42 straight bell section.  Bach 36 straight bell section with 42 slide receiver.  No lacquer, nice patina.  Counterweight included.  $400 DEAL PENDING
https://www.dropbox.com/sh/8y9o1fd3gbyj890/AABzGKPPr8RXiqbtSAvS_7dqa?dl=0

Bach 42 closed wrap valve section.  Excellent condition.  Updated valve linkage.  Bought to use in a project that I am not going to complete.  $350
https://www.dropbox.com/sh/1e9hsdx41zjlro7/AAA-OnLiTko7dMuFeuffE0laa?dl=0

Brasslab Bach 50 straight neck pipe.  Another project that never came to fruition.  $200.00
https://www.dropbox.com/sh/bppndb3la2e68bu/AADJF4Fphj4aux5XJSvyOUFza?dl=0

Bach 50BLGH bell.  Damaged bell – gash and creasing at the rim.  Despite the damage it plays very nicely and I used it as is on my 50B20 for several years before switching to my current Willson bell and had planned to have it patched and made interchangeable.  $150 DEAL PENDING
https://www.dropbox.com/sh/ntsvxwylu2w5kz3/AAB8ysH7rw0KmzjUrITVijUua?dl=0

[s][s]Humes and Berg Clear Tone Mute – decent shape – I just don’t play pits or big bands anymore.  $25
https://www.dropbox.com/sh/1v7k2c235i3avja/AADfsQsTd1RMIPoTVS2PqtMDa?dl=0[/s][/s]

Bach Corporation 42 straight horn.  No lacquer – home done brush on bell, all other parts are spotty lacquer at best.  Dents out, fixed an issue with mpc receiver out of round and chem cleaned at The BrassLab about 18 months ago.  Slide was at The Slide Doctor about two years ago.  Very facile and stable horn – was my daily driver for alrip most 5 years.  Slide currently 8.5/10 (needs a bath).  Little pings here and there typical of a well played horn of this vintage.  I can include the pictured hard case if desired or put it on the curb if you don’t need it.  $1,200
https://www.dropbox.com/sh/hio4lzmanvzy8el/AAAvgh00JMLOF5OaZ3aQ2geVa?dl=0

Griego leather slide wrap.  New in bag.  Never used.  $15
https://www.dropbox.com/sh/muxudm5p11tdtzi/AAAgkQ13A2M47LXb1uyzk9sBa?dl=0

Shires MT2G lead pipe for large bore mouthpieces in Shires .525” slide. $45 DEAL PENDING
https://www.dropbox.com/sh/rpcahpop6ykdy6c/AACeMM6RxpFRvJzBsFFjxLeya?dl=0

Shires MT3 lead pipe for large bore mouthpieces in Shires .525” slide $45
https://www.dropbox.com/sh/vwihpzk1n3x84wb/AAAD-gUamewlTFMyQrG7PxRZa?dl=0

Shires MT3G lead pipe for large bore mouthpieces in Shires .525” slide $45
https://www.dropbox.com/sh/18vvrdz6xj41l0a/AADqKnH7WceUqOkaNu_-2d7ea?dl=0

Shires MT?? mystery unmarked leadpipe for large bore mouthpieces in Shires .525” slide $30
https://www.dropbox.com/sh/chcv5n1zw2jyyxs/AABUbxmNGHdesdwMRFEro2i2a?dl=0

NeoTech grip system.  All parts included plus bonus clamp suitable for Elkhart slides  $20 DEAL PENDING
https://www.dropbox.com/sh/t1v7772tntukkdt/AAAiawCVKxM_UtGSjU01taala?dl=0

[s]Soulo Bass Bucket – Used on 1 gig 5 years ago - $40
https://www.dropbox.com/sh/h6qub8ywunpkxlh/AAApCxHBzy_IJJQyYJpu8cGFa?dl=0[/s]

[s]Humes & Berg Wa-Wa Du All mute.  Plays fine – but shows how many gigs it’s been to in my overstuffed mute bag.  Pics tell the story.  $25
https://www.dropbox.com/sh/ci9ituial0chpcz/AADnS9aYHFcIpWXTY4N69F24a?dl=0[/s]

ttf_Larry Preston Roberson
Posts: 0
Joined: Sat Mar 31, 2018 11:58 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_Larry Preston Roberson »

Bach 50BLGH bell.

So, I know:
G = Gold brass
H = Heavy weight/wall

What does L = ?
ttf_BGuttman
Posts: 0
Joined: Sat Mar 31, 2018 12:15 pm

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_BGuttman »

Should mean Large Diameter (10 1/2")
ttf_sterb225
Posts: 0
Joined: Sat Mar 31, 2018 11:53 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_sterb225 »

L = 10-1/2" is correct.


ttf_Whosaidwhatnow?
Posts: 0
Joined: Sat Mar 31, 2018 11:59 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_Whosaidwhatnow? »

PM sent
ttf_John McKevitt
Posts: 0
Joined: Sat Mar 31, 2018 12:00 pm

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_John McKevitt »

PM  sent for Bell 50BLGH

ttf_leec
Posts: 0
Joined: Sat Mar 31, 2018 12:01 pm

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_leec »

Interested in the Neotec grip if postage to P1H1B7 Ontario, Canada is not too silly.

Thanks,

Lee Copland
ttf_Full Pedal Trombonist
Posts: 0
Joined: Sat Mar 31, 2018 12:00 pm

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_Full Pedal Trombonist »

PM sent
ttf_sterb225
Posts: 0
Joined: Sat Mar 31, 2018 11:53 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_sterb225 »

Hello all - having a crazy busy week at the day job - promise to catch up on messages and emails this evening.

Bill

ttf_jimbeano
Posts: 0
Joined: Sat Mar 31, 2018 11:59 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_jimbeano »

PM sent about Griego leather.
ttf_jimbeano
Posts: 0
Joined: Sat Mar 31, 2018 11:59 am

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_jimbeano »

I'm not sure if you got my PM or not. It please send me an email if the hand guards are still available. My email is show in my profile. Thanks
ttf_Full Pedal Trombonist
Posts: 0
Joined: Sat Mar 31, 2018 12:00 pm

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_Full Pedal Trombonist »

Try emailing him. The PM system here is hit or miss. I got ahold of him today about the neckpipe  Image
ttf_John McKevitt
Posts: 0
Joined: Sat Mar 31, 2018 12:00 pm

Studio Clean Out - Horns - Parts - Mutes

Post by ttf_John McKevitt »

Hi, I am still interested in the 50BLGH.
Post Reply

Return to “Classified Advertisements”