Leadpipe mod to improve high register?

Post Reply
RJMason
Posts: 204
Joined: Tue Jun 05, 2018 2:04 pm
Location: Los Angeles

Leadpipe mod to improve high register?

Post by RJMason »

I have a Williams 7 that sounds great but the high register requires a lot of effort to slot and sound good above a High C. It sounds thin and often hard to lock in and miss partials when I’m soloing or really going for it.

I can pretty easily hit these extremely high notes on my 6H and 36B so I’m thinking it’s a design issue with the Williams itself. I’m wondering if a leadpipe mod could improve this? I’d prefer to use the Williams as much as possible because of its tone.

Does anybody have any luck with another leadpipe such as Shires to improve the slotting and stability of their vintage horn? I read a lot of guys back in the day would put Herrick pipes in their Williams but I don’t think I can get a hold of one of those.

Thanks for the advice!!

-RJ
Bonearzt
Posts: 745
Joined: Thu Mar 22, 2018 7:40 am
Location: My Dungeon of Hell....Actually Texas
Contact:

Re: Leadpipe mod to improve high register?

Post by Bonearzt »

A lead pipe swap "might" help, but I would check the obvious suspects first; waterkey alignment, bad cork not sealing, leak around the w.key nipple, mouthpiece not seating well in the leadpipe, etc...

You might check with Chuck McAlexander to see if he has a Herrick or similar pipe, or just grab a few different pipes & try them out in a playing situation!
MAYBE try a different mouthpiece too, even one of the same you're playing now & see if that changes anything.

Eric
Eric Edwards
Professional Instrument Repair
972.795.5784

"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
blast
Posts: 488
Joined: Thu Mar 22, 2018 6:46 am

Re: Leadpipe mod to improve high register?

Post by blast »

Hey Eric....is Chuck back in business ?

Chris
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Leadpipe mod to improve high register?

Post by Matt K »

Shires #2 is my go to pipe for such a swap because it's available in all the common bore sizes and is usually good in whatever you pop it in even if it ultimately isn't the optimal pipe for the horn. It's also easy to use as a frame of reference that you can then use to make a decision about later. Eg. If the 2 is too open, go smaller. Closed - vide versa. More 'edge', perhaps trying the same pipe in nickel, so on and so forth.
User avatar
JohnL
Posts: 1854
Joined: Fri Mar 23, 2018 9:01 am
Contact:

Re: Leadpipe mod to improve high register?

Post by JohnL »

Legend is that the Herrick pipes were a common mod on Williams 6's used in the studios, so something in that general style might be the ticket.
Bonearzt
Posts: 745
Joined: Thu Mar 22, 2018 7:40 am
Location: My Dungeon of Hell....Actually Texas
Contact:

Re: Leadpipe mod to improve high register?

Post by Bonearzt »

blast wrote: Tue Jun 05, 2018 3:49 pm Hey Eric....is Chuck back in business ?
Chris
Hi Chris!
Not completely, but I think he may still have some stuff available on a very limited basis.

Eric
Eric Edwards
Professional Instrument Repair
972.795.5784

"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Cmillar
Posts: 294
Joined: Tue Apr 24, 2018 5:39 am

Re: Leadpipe mod to improve high register?

Post by Cmillar »

Check out the Brass Ark lead pipe model 32H.

It’s the single best way to improve a horn I’ve ever found. My Bach ‘16 slide/16Mbell/3B slide crook’ horn plays like a dream now.

Every aspect of range, sound, etc. is there now. I have to get used to not trying so hard now to make certain things happen!

Most of all, people out front love the sound... check it out.
Post Reply

Return to “Modification & Repair”