Automotive Detailing Spray Wax/Cleaner for routine maintenance
-
- Posts: 106
- Joined: Sun Jul 01, 2018 8:37 am
Automotive Detailing Spray Wax/Cleaner for routine maintenance
Hello,
A quick search revealed nothing about the practice of waxing 'lacquered' metal, so I apologize if I'm starting a redundancy. Elsewhere I started a thread about using FrogLube on the slide (in progress) as a progressive and alternative approach to 'moist' lubricants, and now I want to know what the prevailing thinking is about using one of the new light detail cleaner/waxes, such as are manufactured for cars by Mothers and Meguiars, as a ritual to wipe down the lacquer, especially at the contact points, when finished playing. They are all pH balanced to neutralize any acids present; at first semi-permeable to allow gassing-off, which then seal as they cure, all in seconds. It eliminates the possible threat of trapping acids under a coat of carnuba or any of the other old-school formulas. Thoughts?
Tim
A quick search revealed nothing about the practice of waxing 'lacquered' metal, so I apologize if I'm starting a redundancy. Elsewhere I started a thread about using FrogLube on the slide (in progress) as a progressive and alternative approach to 'moist' lubricants, and now I want to know what the prevailing thinking is about using one of the new light detail cleaner/waxes, such as are manufactured for cars by Mothers and Meguiars, as a ritual to wipe down the lacquer, especially at the contact points, when finished playing. They are all pH balanced to neutralize any acids present; at first semi-permeable to allow gassing-off, which then seal as they cure, all in seconds. It eliminates the possible threat of trapping acids under a coat of carnuba or any of the other old-school formulas. Thoughts?
Tim
- greenbean
- Posts: 1850
- Joined: Fri Mar 23, 2018 6:14 pm
- Location: San Francisco
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Lacquer needs wax?...
Tom in San Francisco
Currently playing...
Bach Corp 16M
Many French horns
Currently playing...
Bach Corp 16M
Many French horns
- BGuttman
- Posts: 6295
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Some peoples' skin oils or sweat eats at lacquer. These people may need a wax coating to protect it.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
-
- Posts: 95
- Joined: Mon Apr 09, 2018 5:43 am
- Location: York County PA
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
I've used wax, and floor polish, but only on un-lacquered horns after polishing to extend the life of the shine. I no longer do this as it was too much work to bother with.
-
- Posts: 63
- Joined: Fri Mar 23, 2018 1:40 pm
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
My kid plays a scruffy Yamaha euphonium with patches of scratched or missing lacquer. I rubbed the patches with a cloth with vinegar on to brighten them up. Washed it off thoroughly, then put some turtle wax on to keep the air away from the raw brass. The instrument looks much more respectable now -from a distance anyway.
Given the stories I’ve read about people struggling to remove Yamaha lacquer, I doubt that turtle wax will hurt it.
Given the stories I’ve read about people struggling to remove Yamaha lacquer, I doubt that turtle wax will hurt it.
-
- Posts: 745
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
I just use Lemon Pledge furniture polish and a soft rag.
Eric
Eric
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
-
- Posts: 652
- Joined: Fri Mar 23, 2018 5:47 am
- Location: Oklahoma City
-
- Posts: 106
- Joined: Sun Jul 01, 2018 8:37 am
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Hi everyone,
Thanks for posting. For those of you who are younger players, you should know that you can wax anything without risk (assuming that it is just wax, and has no abrasives or harsh cleaners in it), to 'better' protect it from the caustic effect of the air, including air dry lacquer (which is thinner and less durable than the modern plastics); all of which as Bruce pointed though out can be damaged by the acids on your skin.
Wax (organic and synthetic) is a fatty substance that is solid at near ambient temperature, but which becomes soft, usually around 40 C. Most importantly, wax is insoluble in water. Many concerned people wax important glass, and even large glass panes. We have floor to ceiling glass all the way around our urban penthouse, and I have required our window washer to use Turtle Wax Cleaner on those large panes since it was new.
Six years later, we are the only people that don't have etching caused by pollution. Well, because of some people's body chemistry, simply wiping is not enough; especially if there are already micro pores (even in new lacquer poorly applied) in the spray finish. They wax fruit and all kinds of edibles because its properties can be so easily managed, it is non-toxic, and it is innert (doesn't react with things).
If you care about how things look, in addition to how they sound, I recommend that you try one of the very light formula spray cleaner waxes manufactured to maintain what are more or less 'clean' (grit free) automobiles. Your hands are more corrosive than simply pollution, which is why BASF paints (Mercedes, Ferrari, etc.) says that you don't need to wax their clear coat vehicles; unless you touch them all the time, which people usually don't do.
Ironically, guitarists have done it for years without needing to! The acids in your hand are far less reactive with wood; in those instances it is oils that saturate and damage the appearance (color), but not so too the cell structure of wood, which actually hardens as the oils crystallize, further protecting the woods surface.
Oh, and some of them smell very nice. Mmmmm...carnuba...beeswax, even better.
Tim
Thanks for posting. For those of you who are younger players, you should know that you can wax anything without risk (assuming that it is just wax, and has no abrasives or harsh cleaners in it), to 'better' protect it from the caustic effect of the air, including air dry lacquer (which is thinner and less durable than the modern plastics); all of which as Bruce pointed though out can be damaged by the acids on your skin.
Wax (organic and synthetic) is a fatty substance that is solid at near ambient temperature, but which becomes soft, usually around 40 C. Most importantly, wax is insoluble in water. Many concerned people wax important glass, and even large glass panes. We have floor to ceiling glass all the way around our urban penthouse, and I have required our window washer to use Turtle Wax Cleaner on those large panes since it was new.
Six years later, we are the only people that don't have etching caused by pollution. Well, because of some people's body chemistry, simply wiping is not enough; especially if there are already micro pores (even in new lacquer poorly applied) in the spray finish. They wax fruit and all kinds of edibles because its properties can be so easily managed, it is non-toxic, and it is innert (doesn't react with things).
If you care about how things look, in addition to how they sound, I recommend that you try one of the very light formula spray cleaner waxes manufactured to maintain what are more or less 'clean' (grit free) automobiles. Your hands are more corrosive than simply pollution, which is why BASF paints (Mercedes, Ferrari, etc.) says that you don't need to wax their clear coat vehicles; unless you touch them all the time, which people usually don't do.
Ironically, guitarists have done it for years without needing to! The acids in your hand are far less reactive with wood; in those instances it is oils that saturate and damage the appearance (color), but not so too the cell structure of wood, which actually hardens as the oils crystallize, further protecting the woods surface.
Oh, and some of them smell very nice. Mmmmm...carnuba...beeswax, even better.
Tim
- Stive2jones
- Posts: 2
- Joined: Fri Oct 26, 2018 10:13 pm
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Lacquer needs wax???afugate wrote: ↑Sun Aug 05, 2018 5:23 amSame here.
FYI, I find spraying the wax works much better than just wrapping the rag around the can and rubbing it across your horn. YMMV...
--Andy in OKC
- BGuttman
- Posts: 6295
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Needs? No. Can use? Yes. Waxes are good over lacquer to preserve a shine and some are also good over bare brass to slow down tarnish.Stive2jones wrote: ↑Fri Oct 26, 2018 10:17 pmLacquer needs wax???afugate wrote: ↑Sun Aug 05, 2018 5:23 am Same here.
FYI, I find spraying the wax works much better than just wrapping the rag around the can and rubbing it across your horn. YMMV...
--Andy in OKC
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
I use Nu Finish (not really either a wax or a polish) when I manage to clean the exterior of my instruments at all. It works great for applications like this.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 49
- Joined: Fri Sep 14, 2018 10:40 am
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
PSA time: I'm not for a minute saying that using Detailing Wax or Turtle Wax or Lemon Pledge (aerosol) or anything else on a horn is bad for YOU. But it might be. What I know, however, is that someone who would use Turtle Wax on a horn probably doesn't know or care much* about how commercial products interact with the human body. They should. Why it matters? Because being careless around commercial products is the number one cause of Cancer there is. And Cancer is rapidly becoming the number one way for a person to die before their time. It is past time for any American under the age of 80 to act like EVERYTHING they come near could possibly kill them and understand what the best practices are for long term health and safety in a very different world from the one our grandparents grew up, lived, worked and played in. /PSA.
*yes, I know, I am very much generalizing. I apologize.
*yes, I know, I am very much generalizing. I apologize.
-
- Posts: 280
- Joined: Mon Mar 26, 2018 3:14 pm
- Location: Fairfax Station, VA
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Windex. Cleans all the gunk off, doesn't leave anything behind. Works great on both lacquered and plated/raw instruments.
-
- Posts: 745
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Andy, don't make me come up there Man!!!!
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
-
- Posts: 21
- Joined: Sat Mar 30, 2019 5:59 am
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
I have no idea if ammonia is bad for lacquer (let's ask Dr. Guttman) but Windex contains it. They offer an ammonia-free version, however.
Lemon Pledge and just about any of the vast array of grocery store waxes contain detergents. Since I use a few drops of Dawn to make my horn look nice those detergents may be of no concern but some are stronger than others.
Finally, I see a number of "brass" polishing cloths are micro-fiber which will scuff the lacquer on your trombone. A well worn cotton towel is best.
-
- Posts: 96
- Joined: Wed Feb 13, 2019 9:14 am
- Location: East Texas
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Actually, it is the white vinegar, in Windex, you need to worry about. Anything, that is used to speed up a slow sink drain, can't be good for lacquer.TillE wrote: ↑Mon Apr 01, 2019 8:45 amI have no idea if ammonia is bad for lacquer (let's ask Dr. Guttman) but Windex contains it. They offer an ammonia-free version, however.
Lemon Pledge and just about any of the vast array of grocery store waxes contain detergents. Since I use a few drops of Dawn to make my horn look nice those detergents may be of no concern but some are stronger than others.
Finally, I see a number of "brass" polishing cloths are micro-fiber which will scuff the lacquer on your trombone. A well worn cotton towel is best.
- BGuttman
- Posts: 6295
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
The big issue with lacquer is whether it is porous. And that can vary from instrument to instrument.
Epoxy lacquer IKing, Conn, later Yamaha) is pretty inert to anything except strong alkalis like Drano or EZ-Off. Sometimes it can be affected by Methylene Chloride, but that is soon going to disappear from all shelves in the US.
Cellulose lacquer can be affected by some solvents.
If the lacquer is porous, either due to age or abuse, the ammonia can penetrate and cause lift. Ammonia can complex the copper in brass. Acetic acid (vinegar, white or otherwise) can remove the zinc in the brass leading to "red rot". But it has to get to the brass first. Note that both of these would be rather slow reactions on a trombone, and short exposures may not be a problem.
Epoxy lacquer IKing, Conn, later Yamaha) is pretty inert to anything except strong alkalis like Drano or EZ-Off. Sometimes it can be affected by Methylene Chloride, but that is soon going to disappear from all shelves in the US.
Cellulose lacquer can be affected by some solvents.
If the lacquer is porous, either due to age or abuse, the ammonia can penetrate and cause lift. Ammonia can complex the copper in brass. Acetic acid (vinegar, white or otherwise) can remove the zinc in the brass leading to "red rot". But it has to get to the brass first. Note that both of these would be rather slow reactions on a trombone, and short exposures may not be a problem.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
- ssking2b
- Posts: 398
- Joined: Sat Sep 29, 2018 1:34 pm
- Location: Richmond, VA metropolitan area
- Contact:
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Been using a variety of non-abrasive waxes on all my horns for years. Butcher's wax was a good place to start, but it yellows over time. Nu Finish works well, or Blue Coral Autofom (if you can find it, and that is the correct spelling), the Slide Doctor's GREAT SLIDE SLIDE SEALER. Currently using Meguiar's ULTIMATE Quik WAX about once every 1-2 weeks. It works well and looks great.
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
-
- Posts: 487
- Joined: Sat Sep 22, 2018 12:48 pm
- Location: Central Jersey
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
There is a product called "Weekend Waxer" by Hawaiian Island Shine (basically liquid carnauba) that works great. I get tarnish off my handgrip area the I didn't even know was there, and it leaves a light wax coating that last for awhile. I've even used it for a quick polish on my unlacquered Olds and sackbut.
-
- Posts: 247
- Joined: Sun Mar 25, 2018 6:57 pm
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
I'd actually be curious to trying this, as I eat through lacquer pretty quickly. I ate through so much lacquer on my Edwards before I sold it, and I had only had it for 4.5 years. (Did play on it nearly every day though)
Shires - 7YM, TX, Axial, TW47 - Greg Black NY 1
YSL354 - XT LN106, C+, D3
YSL354 - XT LN106, C+, D3
- ssking2b
- Posts: 398
- Joined: Sat Sep 29, 2018 1:34 pm
- Location: Richmond, VA metropolitan area
- Contact:
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
You may need something a little thicker or tougher. Check out this page:
https://www.yourmechanic.com/article/10 ... ryl-knight
Just do a little extra research and make sure the product is abrasive free. Spray on stuff is easier to apply, but you may find a creme or paste wax lasts longer. I have been doing this to horns for years, and while it wont completely stop your body chemicals from eating lacquer, it certainly helps!
https://www.yourmechanic.com/article/10 ... ryl-knight
Just do a little extra research and make sure the product is abrasive free. Spray on stuff is easier to apply, but you may find a creme or paste wax lasts longer. I have been doing this to horns for years, and while it wont completely stop your body chemicals from eating lacquer, it certainly helps!
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
XO Brass Artist - http://www.pjonestrombone.com
===============================================
-
- Posts: 95
- Joined: Thu Apr 12, 2018 5:44 am
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Jubilee Kitchen Wax is great for waxing lacquered horns. I use it on one of my horns, especially, that has patches of missing lacquer. I clean the tarnish off the raw brass with Wright's or some other brass polish and then use Jubilee. Jubilee cleans any remaing residue and leaves a protective wax coating. My mom used to use it for all sorts of things-- she especially used to to clean my younger sister's patent leather shoes-- and I was the one who actually cleaned the shoes, so I remember the stuff well. I inherited several bottles from my mother-in-law when she went into assisted living.
Formerly a Johnson's product, it is now made by someone else. Here's a link to Amazon, but it's a available from several other places online.
https://www.amazon.com/Malco-Products-J ... r=8-4&th=1
Formerly a Johnson's product, it is now made by someone else. Here's a link to Amazon, but it's a available from several other places online.
https://www.amazon.com/Malco-Products-J ... r=8-4&th=1
-
- Posts: 1610
- Joined: Tue Jul 02, 2019 9:06 am
- Location: New Jersey
- Contact:
Re: Automotive Detailing Spray Wax/Cleaner for routine maintenance
Turtle Wax Black Ice. It's very light weight, and is more of a cleaner than anything else.
I use it on Guitar amplifier vinyl, and it does a great job of cleaning and adding just a TINY bit of "pop" to the look.
Also a nice cloth with a spray or silicone can help. UMI used to make these blue polish cloths that had bit of silicone in them. Great for getting off water stains and the like.
I use it on Guitar amplifier vinyl, and it does a great job of cleaning and adding just a TINY bit of "pop" to the look.
Also a nice cloth with a spray or silicone can help. UMI used to make these blue polish cloths that had bit of silicone in them. Great for getting off water stains and the like.
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone